Anyone parting out a sr20det? or has an sr20det block laying around...

[HalfBaked]

I need a nipple off the block. It is located under the intake manifold.


http://i2.photobucket.com/albums/y27/HalfBaked2002/sr20dettttt001.jpg

http://i2.photobucket.com/albums/y27/HalfBaked2002/sr20dettttt002.jpg

[boommer]

If that is a fwd block i think i have that nipple in my tool box. Just send me a pm

[BTLFED]

I told you to come up to my work and look at the diagrams. I can probably get it for you.

Hell, I have a Nissan Fast CD, I can bring it and my laptop over and we can look at it that way.

[HalfBaked]

If that is a fwd block i think i have that nipple in my tool box. Just send me a pm
Sent ya a PM.

[sean8564]

If is a RWD SR I have one.

[BTLFED]

It's a FWD SR.

[sebastianHoff]

that hole is pluged on the rwd block. may i ask where it goes?

[HalfBaked]

It goes right under the intake manifold. It is kinda hard to explain.

[TheSnail]

I think what you are missing is a plug rather then a nipple. I checked out the fsm, and figured by the first pic you posted was this part. In your first picture you can see the treaded hole (top left) where your knock sensor is. Now this is the thing. I have a DE fsm so what Im thinking is if it did have a nipple or any threaded housing previously there, then it went to the turbo (oil + water cooled). So check to see where the turbo's metal coolant lines go. If they have there own place then you just need to get a plug which I have. If the turbo coolant lines do go there then you can go to homedepot and make the "adapter" for 10ish dollars.





http://i7.photobucket.com/albums/y261/thesnail/rrk.png?t=1175759830

http://i7.photobucket.com/albums/y261/thesnail/rrs.png?t=1175759859

[HalfBaked]

The UK motors have the nipple, I have the UK part number but it isn't the same here.

http://www.primera-egt.com/FASTpics/oil%20cooler%20connector.gif

[sebastianHoff]

ok its an oil line, thats what i wanted to know. im willing to bet it fwd specific.