PacoX
03-31-2007, 12:22 PM
Cleaning out my closet-
Stock S14 rear control arms (RUCA, toe arms, traction rods): $15/pair, in good shape but I got adjustable heim jointed arms. Just want to get rid of these really.
SSAC turbo manifold for KA24DE- modded slightly, cut expansion slots in head flange. Also has EGT bung plugged. with a removable fitting. Worked very well on my car until my crappy downpipe cracked and I went with a different mani/DP setup. I ran it for about 600 miles with a downpipe that had a flex section and stiffer engine mounts, and it has no cracks. Can throw in wg dump tube for free (1.5" stainless with standard Tial 38mm flange, dumps to ground around bellhousing) $75-PENDING SOLD
Stock S14 steering wheel: Great condition black wheel w/ unpopped airbag and cruise control buttons, $75.
Fuel pressure gauge adaptors: 1/8" NPT to 5/16 barb, you need two if you use a 1/8" NPT tee to add a fuel pressure gauge, they're hard to find and only come in packs of 10 from McMaster, which is why I have 8 for sale. $1 each, plus shipping, maybe I could ship them in an envelope? Maybe better for local pickup.
Stock S14 exhaust, not really rusty at all- $10
4 stainless steel brackets for hybrid brand intercooler on S14, never used-$10
S13 KA24DE exhaust cam: 248 duration, nice mod for intake side of S14 engine with turbo setup (248/232), or combine with another 248 cam for N/A setup (248/248). $50 PENDING SOLD
Prices do not include shipping, that will be worked out depending where you are.
If interested in anything EMAIL me (rrozyckATgmailDOTcom). I don't check this forum very often and email will get you a much quicker response.
Stock S14 rear control arms (RUCA, toe arms, traction rods): $15/pair, in good shape but I got adjustable heim jointed arms. Just want to get rid of these really.
SSAC turbo manifold for KA24DE- modded slightly, cut expansion slots in head flange. Also has EGT bung plugged. with a removable fitting. Worked very well on my car until my crappy downpipe cracked and I went with a different mani/DP setup. I ran it for about 600 miles with a downpipe that had a flex section and stiffer engine mounts, and it has no cracks. Can throw in wg dump tube for free (1.5" stainless with standard Tial 38mm flange, dumps to ground around bellhousing) $75-PENDING SOLD
Stock S14 steering wheel: Great condition black wheel w/ unpopped airbag and cruise control buttons, $75.
Fuel pressure gauge adaptors: 1/8" NPT to 5/16 barb, you need two if you use a 1/8" NPT tee to add a fuel pressure gauge, they're hard to find and only come in packs of 10 from McMaster, which is why I have 8 for sale. $1 each, plus shipping, maybe I could ship them in an envelope? Maybe better for local pickup.
Stock S14 exhaust, not really rusty at all- $10
4 stainless steel brackets for hybrid brand intercooler on S14, never used-$10
S13 KA24DE exhaust cam: 248 duration, nice mod for intake side of S14 engine with turbo setup (248/232), or combine with another 248 cam for N/A setup (248/248). $50 PENDING SOLD
Prices do not include shipping, that will be worked out depending where you are.
If interested in anything EMAIL me (rrozyckATgmailDOTcom). I don't check this forum very often and email will get you a much quicker response.