FUEL AND SPARK...STILL WON'T CRANK

[r_Senik]

i have a 00 civic si. i changed out the rotor button and cap...it was running fine before..but i decided to do it since i was doin a rutine tune-up. well i took of the distributor and put all the new stuff on it...put it back and now it wont start...i hear the fuel pump turn or whatever when i turn the key and i checked for spark..but still wont crank...im pretty sure the spark plug wires are in the right sequnce??

ps. the distributor was hard putting back in..i checked to if it was alighn with the cam and all

should i check the timing?
compression?
new distributor??

i really need help

[2.3 Evo 8]

Put it back the way it was if you can't get this to work.

[Annihilation]

you prolly put the spark plug wires on wrong on the cap

[Annihilation]

bottom left is #1, bottom right is #2, top left is #3 top right is #4

[Annihilation]

#1 cylinder is the closest to the pulley/belt side

[Evil Goat]

sounds like wires may be in wrong order as stated above, if that isn't it then i would check the timing

[GSRteg®]

Yeah what they said spark plug in wrong order....

[HiPSI]

are you saying you pulled the whole distributor out to change the cap/rotor?