UPMotorsport
03-18-2007, 09:07 PM
APPROVED BY MR.KIDD
Im selling my FULLY BUILT LS/vtec setup. Ive only ran it with LS/vtec for 200 miles or so (I RARELY drive my car, because I cant stop changing things on it=() The motor is built with top notch parts. No cheap shit. The bottom end has about 15k miles on it. Nothing wrong with the bottom end. Top end has approx 200 miles on it. Turbo kit is pretty new.
Turbokit:
SFP Turbo Manifold- SOLD
Garrett t3/t04e 60 trim (200 miles, BOUGHT BRAND NEW) SOLD
Precision 1000c Injectors (400 miles, BOUGHT BRAND NEW) $250
AEM Fuel Rail- SOLD
Oil lines(return and feed)SOLD
2.5 Inch DP- $135
Greddy PROFEC- MAKE OFFER
Greddy Type 24 FMIC- $300
FULL IC piping- $175
HKS SSQV BOV- $125 ($275 w/ piping)
Turbonetics EVOLUTION- $175
Head(COMPLETE)(Valve Cover, Dizzy, Solenoid, EVERYTHING COMPLETE!!!)
B16 head
Blox Dual valve springs and retainers (bought from spoolin performance
Ferrea Valves (Bought brand new)
AEM cam gears
b16 cams
$1100
Block
B18b1 block
Benson Sleeves(83mm)
CP pistons (9:1)
Eagle H Beam rods
ACL Bearings
ARP headstuds
Balanced and Blue printed
Block was built by Laskey racing
$2000
Golden Eagle LS/vtec minus HEADGASKET
EVERYTHING BUT HEADGASKET- $125
Greddy FMIC
http://i35.photobucket.com/albums/d171/suprastuff1/PICT2912.jpghttp://i35.photobucket.com/albums/d171/suprastuff1/PICT2913.jpg
Precision 1000cc Injectors
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00891.jpg
Head
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00884.jpg
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00883.jpg
Fuel rail
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00780.jpg
SFP Manifold
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00701.jpg
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00700.jpg
BOV
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00699.jpg
REASON SELLING: This is the only car I have. I want a motor that I know 100% everytime I turn the key it will start and have no problems. I havent had any problems with this motor other then it needs a new starter:rolleyes: . But I just want my DD car to be STOCK with no mods at all, so Im 100% confident in the reliability. So this motor is coming out, and a stock B16 is going it
TRADES: ONLY TRADES I AM INTERESTED IN ARE
1. WHALE PENIS CARBON FIBER INTAKE
2. BLACK RECARO'S WITH RED STICHING
3. RED CTR CARPET
CAR IS GOING TO MAINSTREAM ON TUESDAY, THEN THEY ARE PULLING THE MOTOR. I KNOW I DO NOT HAVE VERY GOOD PICS OF THE MOTOR, BUT I WILL IN A COUPLE DAYS, EVERYTHING ELSE IS PRETTY MUCH IN THE PICS. IM SURE ONCE ITS PULLED MIKE WOULD POST SOME PICS OF IT FOR ME.
IF YOU ARE INTERESTED IN ANYTHING, YOU CAN CALL/TEXT ME AT 404-518-9494 OR PM ME ON HERE
Im selling my FULLY BUILT LS/vtec setup. Ive only ran it with LS/vtec for 200 miles or so (I RARELY drive my car, because I cant stop changing things on it=() The motor is built with top notch parts. No cheap shit. The bottom end has about 15k miles on it. Nothing wrong with the bottom end. Top end has approx 200 miles on it. Turbo kit is pretty new.
Turbokit:
SFP Turbo Manifold- SOLD
Garrett t3/t04e 60 trim (200 miles, BOUGHT BRAND NEW) SOLD
Precision 1000c Injectors (400 miles, BOUGHT BRAND NEW) $250
AEM Fuel Rail- SOLD
Oil lines(return and feed)SOLD
2.5 Inch DP- $135
Greddy PROFEC- MAKE OFFER
Greddy Type 24 FMIC- $300
FULL IC piping- $175
HKS SSQV BOV- $125 ($275 w/ piping)
Turbonetics EVOLUTION- $175
Head(COMPLETE)(Valve Cover, Dizzy, Solenoid, EVERYTHING COMPLETE!!!)
B16 head
Blox Dual valve springs and retainers (bought from spoolin performance
Ferrea Valves (Bought brand new)
AEM cam gears
b16 cams
$1100
Block
B18b1 block
Benson Sleeves(83mm)
CP pistons (9:1)
Eagle H Beam rods
ACL Bearings
ARP headstuds
Balanced and Blue printed
Block was built by Laskey racing
$2000
Golden Eagle LS/vtec minus HEADGASKET
EVERYTHING BUT HEADGASKET- $125
Greddy FMIC
http://i35.photobucket.com/albums/d171/suprastuff1/PICT2912.jpghttp://i35.photobucket.com/albums/d171/suprastuff1/PICT2913.jpg
Precision 1000cc Injectors
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00891.jpg
Head
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00884.jpg
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00883.jpg
Fuel rail
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00780.jpg
SFP Manifold
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00701.jpg
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00700.jpg
BOV
http://i35.photobucket.com/albums/d171/suprastuff1/DSC00699.jpg
REASON SELLING: This is the only car I have. I want a motor that I know 100% everytime I turn the key it will start and have no problems. I havent had any problems with this motor other then it needs a new starter:rolleyes: . But I just want my DD car to be STOCK with no mods at all, so Im 100% confident in the reliability. So this motor is coming out, and a stock B16 is going it
TRADES: ONLY TRADES I AM INTERESTED IN ARE
1. WHALE PENIS CARBON FIBER INTAKE
2. BLACK RECARO'S WITH RED STICHING
3. RED CTR CARPET
CAR IS GOING TO MAINSTREAM ON TUESDAY, THEN THEY ARE PULLING THE MOTOR. I KNOW I DO NOT HAVE VERY GOOD PICS OF THE MOTOR, BUT I WILL IN A COUPLE DAYS, EVERYTHING ELSE IS PRETTY MUCH IN THE PICS. IM SURE ONCE ITS PULLED MIKE WOULD POST SOME PICS OF IT FOR ME.
IF YOU ARE INTERESTED IN ANYTHING, YOU CAN CALL/TEXT ME AT 404-518-9494 OR PM ME ON HERE