GET8UP
03-17-2007, 11:38 AM
I'm selling a Kicker SX1250.1 amp. It is in good condition. Here are the specs.
Product Description:
MODEL: SX1250.1
625 watts RMS x 1 at 2 ohms
1250 watts RMS x 1 at 1 ohm
1-ohm stable
amp operates at 4 ohms (producing 312 watts), but Kicker recommends a 2- or 1-ohm load for maximum performance
requires 2-gauge power and ground leads -- wiring and hardware not included with amplifier
keypad menu control
variable low-pass crossover (30-200 Hz) with adjustable slope (choose from 6, 12, 18, 24, 30, 36, 42, and 48 dB/octave)
variable subsonic filter (10-60 Hz) with adjustable slope (choose from 6, 12, 18, and 24 dB/octave)
Digital KickEQ single band parametric equalizer with variable center frequency and variable Q
Wired Bass Remote included
Kompressor expansion/compression circuitry with four settings: Off, Contour, Attack, and Redline
4 memory banks store intricate EQ cut/boost, low-pass crossover, phase, bass boost, sub-sonic filter, and compression settings
Sick Bay technology for real-time diagnostics and troubleshooting (includes pink noise generator)
preamp outputs
UltraMatch gain control for optimal input level matching
amp strapping circuit lets you connect a second SX1250.1 amp for double the power output
cooling fan
22-1/2"W x 2-1/2"H x 10"D (17-1/2"W without endcaps)
Amplifier Specifications:
Number of Channels 1
RMS Power (4 ohms) N/A
RMS Power (2 ohms) 625 watts x 1 chan.
RMS Power (1 ohm) 1250 watts x 1 chan.
Bridged RMS Power Not Bridgeable
Peak Power Output Not Specified
Min. Impedance Unbridged 1 ohm
Min. Impedance Bridged Not Bridgeable
THD @ Rated RMS Power 1.5%
Speaker Level Inputs No
Amp Preamp Outputs 1 Pair
Built-in Crossover Yes - HP / LP
High-Pass Crossover 10 - 60 Hz
Low-Pass Crossover 30 - 200 Hz
Subsonic Filter N/A
Signal-to-Noise Ratio 98 dB
Channel Separation N/A
Bass Boost -18 -- +18 dB
Bass/Gain Remote Yes
Fan Cooled Yes
Fuse Rating 150A
Price: $250 OBO (it sells on ebay for $400-$500)
Product Description:
MODEL: SX1250.1
625 watts RMS x 1 at 2 ohms
1250 watts RMS x 1 at 1 ohm
1-ohm stable
amp operates at 4 ohms (producing 312 watts), but Kicker recommends a 2- or 1-ohm load for maximum performance
requires 2-gauge power and ground leads -- wiring and hardware not included with amplifier
keypad menu control
variable low-pass crossover (30-200 Hz) with adjustable slope (choose from 6, 12, 18, 24, 30, 36, 42, and 48 dB/octave)
variable subsonic filter (10-60 Hz) with adjustable slope (choose from 6, 12, 18, and 24 dB/octave)
Digital KickEQ single band parametric equalizer with variable center frequency and variable Q
Wired Bass Remote included
Kompressor expansion/compression circuitry with four settings: Off, Contour, Attack, and Redline
4 memory banks store intricate EQ cut/boost, low-pass crossover, phase, bass boost, sub-sonic filter, and compression settings
Sick Bay technology for real-time diagnostics and troubleshooting (includes pink noise generator)
preamp outputs
UltraMatch gain control for optimal input level matching
amp strapping circuit lets you connect a second SX1250.1 amp for double the power output
cooling fan
22-1/2"W x 2-1/2"H x 10"D (17-1/2"W without endcaps)
Amplifier Specifications:
Number of Channels 1
RMS Power (4 ohms) N/A
RMS Power (2 ohms) 625 watts x 1 chan.
RMS Power (1 ohm) 1250 watts x 1 chan.
Bridged RMS Power Not Bridgeable
Peak Power Output Not Specified
Min. Impedance Unbridged 1 ohm
Min. Impedance Bridged Not Bridgeable
THD @ Rated RMS Power 1.5%
Speaker Level Inputs No
Amp Preamp Outputs 1 Pair
Built-in Crossover Yes - HP / LP
High-Pass Crossover 10 - 60 Hz
Low-Pass Crossover 30 - 200 Hz
Subsonic Filter N/A
Signal-to-Noise Ratio 98 dB
Channel Separation N/A
Bass Boost -18 -- +18 dB
Bass/Gain Remote Yes
Fan Cooled Yes
Fuse Rating 150A
Price: $250 OBO (it sells on ebay for $400-$500)