XX Maxximus, Anyone seen this before?

[dtmcnamara]

10,000 watts? HOLY FUCKEN SHIT!!!

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16720

http://www.onlinecarstereo.com/UIControls/cachedimageservice.axd?data=7b699761-fcc9-4d90-9b20-bc5537f97026

Technical Specification

* RMS Power Range : 2000-10000 Watts
* Number Of Channels: 1
* Low Frequency response: 2 Hz
* High Frequency Response: 70000 Hz
* Built In Crossovers: Yes
* Channel Separation: Yes

Features

* 10-kilo Watts /1 x 10,000-Watts RMS @ 2-Ohm
* 2000 watts RMS x 2 channels into 4 Ohms (stereo)
* 3500 watts RMS x 2 channels into 2 Ohms (stereo)
* 5000 watts RMS x 2 channels into 1 Ohms (stereo)
* 7000 watts RMS x 1 channel into 4 Ohms (bridged)
* 10000 watts RMS x 1 channel into 2 Ohms (bridged)
* Suggested In-Line Fuse Rating 1100 Amps
* Frequency Response 2Hz - 70 K Hz (-3dB)
* Damping >400
* Signal to Noise Ratio >98 dB
* THD + Noise 0.1%
* Variable Input Level 0.2V - 9V (RCA/Unbalanced)
* Variable Input Level 0.4V - 18V (Mini DIN Balanced)
* Dimensions 11.20 W X 5.50" H X 28" L (Endcaps + 5.32")
* 2/1-Ohm Speaker Impedance Capable with Quad Turbo Power Supply Torroids in a PWM MOSFET Power Supply Design.
* Rock Stable Ultra-Fi™ MOSFET Outputs
* Excessive Cone Excursions Controlled by Subsonic Filter
* Wide Voltage Range Variable
* Input Level Controls
* Adjustable Crossovers For Better Subwoofer Control
* High Damping Factor For Precise Transient Response
* Phase Shift Correction For Asymmetrical Speaker to Ear Distances
* Balanced Line Input, for Optional MMBLD-1 Balanced Line Driver
* Highly Efficient Ultra D-Class™ Amplifier Topography
* Low Impedance Stability
* Mono-Block Capable for Subwoofer Operation
* Versa-Cross™ Crossover Adjusts Low-Pass, Subsonic, Phase & Q
* Blue Illuminated Logo
* XXR-1 Remote Bass Control Included
* High-Speed Ultra-Fi™ MOSFET Output Devices
* RJ45 IN/Out Controls 2-Amps With One Remote Bass Control
* RCA Line-Outs for Multiple Amplifier Systems
* Soft Start Prevents Turn-on Thumps
* Variable - 24dB Subsonic Filter (10Hz to 50Hz)
* Adjustable Low-Pass (35Hz to 250Hz)
* Variable Bass Boost (+ 18dB)
* Bass EQ Variable 30Hz to 60Hz
* Q-Control (Wide to Narrow Bandwidth)
* Phase Shift Control Adjusts, 0 to 180
* Balanced Line Input (Use optional MMBLD-1 Line Driver)
* Protection System Diagnostics
* Overload Protection
* Thermal Over-Temp Protection
* Speaker Short Circuit Protection
* Amplifier Endcaps Included

[dtmcnamara]

is this really necessary? what would need 10000 watts at 1 ohm?

[BKgen®]

imax theater uses a little more than that. like 12 or 13k.

that's insane.

[dtmcnamara]

imax theater uses a little more than that. like 12 or 13k.

that's insane.

this is for a car... how many batteries would be needed to power this? :thinking:

[BKgen®]

i have no idea.
i'm not an audio guy. all i did in my car was the fiberglass.