PDA

View Full Version : Power Mods Vteckidd Help me Out



civic-r11
06-24-2005, 11:12 AM
I am wanting to build my ls/vtec soon and i am wondering how much will it cost me to do the whole thing, if i come to you cause you know you stuff? I have a ls motor so i need a vtec head. I kind of have a little estimate how much it will cost but you have done this many times so i am asking you.

A.P. Photography
06-24-2005, 12:11 PM
You really need to send him a PM.

ash7
06-24-2005, 06:19 PM
one

million

dollars

Vteckidd
06-24-2005, 07:00 PM
I am wanting to build my ls/vtec soon and i am wondering how much will it cost me to do the whole thing, if i come to you cause you know you stuff? I have a ls motor so i need a vtec head. I kind of have a little estimate how much it will cost but you have done this many times so i am asking you.
send me a PM ill give you more info. i need to know what you want to do, how much power you wanna make, etc

single_cam_ham
06-24-2005, 07:15 PM
get everything before you bring it in..save you a little in the end...

civic-r11
06-25-2005, 09:31 PM
I am looking for about 300hp. I want to do a ls/vtec turbo with a t3/t4 turbo with a built block and mild port and polish job on my head. I also want a redline about 9000 too. That is what i am looking for! I have a ls motor already!

bluuuurr
06-26-2005, 12:36 AM
dayum nigga you'll run 9s

civic-r11
06-26-2005, 05:43 PM
For getting around 300 + power should i go ahead and get my block sleeved?

flysi00
06-26-2005, 05:52 PM
^^^^^^^ i would

-S Double C-
06-27-2005, 05:09 AM
dayum nigga you'll run 9s

:lmfao: ...damn he let the cat out the bag

A.P. Photography
06-27-2005, 07:55 AM
I am looking for about 300hp. I want to do a ls/vtec turbo with a t3/t4 turbo with a built block and mild port and polish job on my head. I also want a redline about 9000 too. That is what i am looking for! I have a ls motor already!
Do you not understand the concept of PM's :rolleyes:

Hulud
06-27-2005, 08:29 AM
^guess not

BTEC
06-28-2005, 08:15 AM
^^ lol!!

Vteckidd
06-28-2005, 09:02 AM
For getting around 300 + power should i go ahead and get my block sleeved?
300+ if your going turbo no. i would change the rods and pistons and with a good tune you can hit 400whp, if your turbo is set up to handle it