FS: DA 1993 Integra Brakes

[EvasiveEF9]

I'm parting out a 93 Integra, and so far I've got the brakes for sale... These brakes would be an AWESOME upgrade for an EF civic, or other swaps. I think they will work on an EG as well, but that's up to you to research.

I will include (and may part)

Booster
MC
4040 Prop
Front knuckle, rotor, caliper, hub (hubs/bearings are good)
Rear trailing arm, rotor, caliper, ebrake cable (hubs/bearings are good)

Pads are pretty much dead. You can have them if you want them. No "grinding marks" on rotors.

I'll sell all of this in a package for 250$ obo (better be a good offer)
I'll sell front brakes alone for 125$
I'll sell rear brakes w/ 4040 for 175$ or 150$ w/o 4040
I'll sell 4040 alone for 35$
I'll sell booster/MC together for 40$

I'm still working to pull the brakes off the car that I'm parting, so I do not currently have good pictures. They will be posted IMMEDIATELY when I can get the brakes to fall off the car.

ADMINS: Please advise if post is deleted for lack of pictures. I will have them up soon, but it's hard to get a good shot while they are still on the car.

Thanks for looking!

Keywords for search: Disc Disk discs disks rear conversion proportioning trailing arms

[KevinT707]

I got $50 on it, LMK.

Cash in hand! :yes:

[EvasiveEF9]

I got $50 on it, LMK.

Cash in hand! :yes:
Didn't I tell you 30, already? LoL, free bump, I guess.

[KevinT707]

Didn't I tell you 30, already? LoL, free bump, I guess.
What the hell dude? I'm confused.. the price says like $250 but how much will it ALL cost for ME??

[bigdare23]

hey would 14in rims fit over them?

[EvasiveEF9]

hey would 14in rims fit over them?
Yes, 14's will fit over them, but in the front it's very close. But they will fit...

[EvasiveEF9]

Little higher on the board...

[madwick]

hey is it a non abs master cylinder and brake booster? if so i'm interested!

[EvasiveEF9]

Uh...not sure that it'll matter. But if it does, these DO have the ABS on them. If they do differ, what's different on them?

[EvasiveEF9]

Wait...on second thought...I dont' think it is abs? I'll check tomorrow and get back to you around noon-time probably.

[madwick]

well here's my dilema

i did the jdm front for the dc2 with hid's so i installed the non abs (94,95 RS) brakes and all. though i had a gs-r i thought only the pipes would differ then i realized i needed a new MC and then they worked but i noticed that the plunger is too long and called acura. 90-95 non abs brake booster is diferent from 90-01 abs brake booster. so it need the non abs booster to allow me the ability to drive this fucking car that i've dumped over 12k in and still not painted and it only has a b20!

please let me know it is abs or not cause ill be there sunday to pick it up! thanks bro

[madwick]

you can find out if it does or doesn't by;

what model it is
can you install a tower strut bar in the engine bay. the abs unit is in the way and does not allow you to install one. if no abs unit then i can get that booster from you and actually drive this piece that has a brand new crower built blown type-r motor and a fully functional b20 in it.

sorry about that i have been self working on this project for over a year now and it's the final leg of this race and i need the non abs booster so i dont fry my brakes!

[thinkskater]

i want the pro valve......

[Pavlo]

Hey, if you are still parting the car out, then I still want the stock axle-back, my muffler gives me headaches.

[EvasiveEF9]

you can find out if it does or doesn't by;

what model it is
can you install a tower strut bar in the engine bay. the abs unit is in the way and does not allow you to install one. if no abs unit then i can get that booster from you and actually drive this piece that has a brand new crower built blown type-r motor and a fully functional b20 in it.

sorry about that i have been self working on this project for over a year now and it's the final leg of this race and i need the non abs booster so i dont fry my brakes!
It's non-abs. Next move is yours. Let me know if you want it, but I'm gonna try to finish pulling it all tomorrow.

i want the pro valve......
You're the second one wanting the prop valve alone. I'd like for it to go with the complete setup, though

Hey, if you are still parting the car out, then I still want the stock axle-back, my muffler gives me headaches.
Got your PM and replied.

[madwick]

i'll pick up the booster sunday if thats okay!

[EvasiveEF9]

Booster and MC pending to madwick

Thinksktr - I just sent a message to the guy interested in the prop valve. I'll know by tonight if it's available to you or not.

[2.0civic]

you can find out if it does or doesn't by;

what model it is
can you install a tower strut bar in the engine bay. the abs unit is in the way and does not allow you to install one. if no abs unit then i can get that booster from you and actually drive this piece that has a brand new crower built blown type-r motor and a fully functional b20 in it.

sorry about that i have been self working on this project for over a year now and it's the final leg of this race and i need the non abs booster so i dont fry my brakes!

how the fuck do you have a type r and a b20 in the same car?:thinking:

[EvasiveEF9]

how the fuck do you have a type r and a b20 in the same car?:thinking:
I was gonna ask the same, but a salesman never asks questions...just makes the sale.