New clutch question

[Ruststang]

I just installed a stage 3 6 puck clutch in my 92 240 sx ka-t and i was expecting it to work right away but it tried it out and it still slips.. Ive just adjusted the pedal but i dont think its going to help much and was wondering about the break in period. I think it said 500 miles so should i expect it to slip until it broken and just drive it easy or should i be concerned? Its slipping when i make full boost and my car is only making around 240hp..

[Flip]

Did you resurface your flywheel?

[shavedcivic]

^^^^^^^
Flip???
hey man, you still got that integra??? I used to come over to your house with that crazy russian. Lexy

[Ruststang]

Did you resurface your flywheel?

Yes i had the flywheel done with the clutch

[Ruststang]

also i adjusted the rod on the pedal almost all the way with most of the threads on the pedal side instead of the firewall side.

[speedminded]

no strange noises like the disc or pressure plate isn't seated properly?

[Annihilation]

did u get a heavy duty pressure plate or did you use a stock one?

[§treet_§peed]

^ good point

[Krazykouki]

when you break in a clutch you dont let it go into full boost because you are not supposed to go all out on it. There is a break in period for a reason.

[§treet_§peed]

first 500 or so miles is the proper break in period