FS: 1999 Civic Coupe LS/VTEC

[Game2954]

Well the time has come to let go of my Civic. Unfortunately I am not looking for trades since I have already purchased a new car and have a total of four cars (with only a three car garage!) The car is already wired for amps and the doors are covered in Dynomat. It has Power windows and doors (doors pop open from the key fob), Power steering (just need the belt)

This is what it has, currently 74,100 miles on car. The swap was done at 45000 miles.

Engine
1998 B18B Block (60,000 miles)
-balanced and machined bottom
-Crower Piston Rods
-Arp Rod Bolts
-8 lb Flywheel
-polished crank
-Greddy 4-2-1 Headers
-Golden Eagle LS/VTEC Conversion Kit
2000 B16A2 Head (60,000 mles)
-SI Pistons
-Skunk 2 Cam Gears
-STR Competition Fuel Rail
-LS Intake Manifold
-AEM CAI (Painted black)
-Chipped (Skunk2) OBD I Integra GSR ECU
-Walbro 255 lph fuel pump (intank)
-Tanabe Catback Exhaust
-Stock Civic SI Strut bar
-Stock Injectors
Transmission
2000 Honda Civic SI Transmission (60,000 miles)
-Exedy Stage 2 Clutch
-BM Shortshifter

Suspension
-Skunk2 Springs
-KYB Adj Coilovers
-2" Drop
-18" rims
-Skunk2 Rear lower srut bar

Interior
-Momo Formula Steering Wheel
-Momo Pedals
-Custom Green Carpet
-Corobeau Clubman seats
-AutoMeter Tach Molded into Dash

Exterior
-Civic Si Front bumper
-Blacked out Headlamps w/citylights
-Shaved door handles and locks
-CF hood
-Si Foglights

The Bad: (please read)
The head will need to be checked because a valve is bent (not sure if it is an intake or exhaust or both). This is causing the car to smoke on initial acceleration. Worst case you can replace the head. Also the rear bumper will need to be repainted (will show in later pics)

Since there is some work that needs to be done I am looking for $3750-4000. Which I don't think is a bad deal. (Promptly placing on my flame suit!)

Any questions at all feel free to contact me [email protected]

Mods: VIN availible upon request

[Game2954]

here are some more pics..

[aaronfelipe]

Pretty sick car,

[S II K]

how much is a head for this civic?

[aaronfelipe]

I would guess $250 for a new one.

[S II K]

I would guess $250 for a new one.


hmm not bad so im guessing labor work is what kicks your ass?

[aaronfelipe]

I would guess $250 for a new one.
Actually, for some reason I was thinking a D-series head. B-series should run you closer to $1,000.

[S II K]

Actually, for some reason I was thinking a D-series head. B-series should run you closer to $1,000.


ha shit nevermind then. i wouldnt be interested in buying a car that i have to spend 1k to make it run ok

[Killer]

u could get a vtech head prolly pretty cheap for a used one... a new one would be costly... and a rebuilt one would be too...


labor would run prolly around 400-500 ( i know cause i just got my b18a1 head replaced)

the labor could be done urself.. but i wouldn't recomend it...

good price though, clean car. gl on sale

[B_Hoov]

could i fix the head? im good friends with brad ( brads machine shop ) just replace all the valves?

[Brandon C]

Interested..Do you have the Factory Interior and a Vin Please...

[Z33_kid]

nice deal bump

[S II K]

yeah i wouldnt do the labor work especially on a head. so for me it would be costly but hey g/l with the sell

[BABY J]

Stock loaded B16A heads $350 (some guy who has a court-date and needs the loot) to $450 (some guy who can give a shit less if he sells it or not and will sit on it b4 he just GIVES it away).

[Turbodude06]

very interested PM'd u......

[integra8705]

was this pauls old car?

[SKarpenz]

Get a DOHC head for like 350 and put it in yourself. Not that hard you guys. That is a GREAT price on that car.

[Game2954]

Here are some pics of the bumper damage..

[Turbodude06]

well I'll take the car if you call me 404-680-2293

[haizengter]

im interested in maybe buying ur 97 civic.....

plzz contract me at

[email protected]

[Game2954]

Still for sale I returned all PM's and calls.

[JR VQ 30 de]

hey i sent u an e-mail call me at 678-683-2047

[Ruststang]

Pull the head and get the new valves and take it to cylinder head exchange they will charge you 175 for the rebuild

[iNsTuN nOoDoH]

I didn't know you could fit ls manifolds on a b16 head.

A valve job is probably 300 plus the price for parts and you got the possibility of damaged pistons from the valves hitting the domes...

Good luck on the sale though.

[Turbodude06]

I think he already sold this thing because he never returned my Pm's

[Game2954]

Still for sale.. some ppl came by this weekend to kick the tires :(

[JR VQ 30 de]

Still for sale.. some ppl came by this weekend to kick the tires :(

kick tires ???

[Game2954]

yeah someone wanted too look at it and drive it around, but then said they didn't have the cash...

[Turbodude06]

I got the cash if you want to sell it.....

[FutureManLS]

For the price you want, its crazy why this hasnt sold yet...:???:

[Turbodude06]

because he doesn't answer his PM's.....

[soplocar]

this car is clean, considering any trades??

[Turbodude06]

If you really want to sell your civic I will pick it up this weekend probably Sunday cause thats my day off, I have the cash in hand, no playing games, so call me 404-680-2293 I'm T.J. and let me know..... (I pm'd u this too)

[atlaoslayd3e]

nice

[Game2954]

Car sold!!!!!!!! Thanks all for playing!! Mods can close thread..:)

[GSRteg®]

Bump