NISxMO
02-23-2007, 09:53 PM
Make: Mazda
Model: Rx-7 vert
Year: 1991
Mileage: 130k
Options: ac, pw, pdl, leather, cd, power top, cruise, BBS ALLOYS....pretty much fully loaded
Mods: Mazdatrix short shifter...wants to keep this thing pretty clean & stock. *edit* Forgot to mention pretty much ever hose on this car is steel braided.
Engine: 13B rotary
Condition: Body in great condition, few minor dings and scratches common for all older cars, plastic bumpers still hold glean when waxed. Interior in great shape, original foormats still used which are no longer made. two very small holes in seats and only noticed when pulled apart. never smoked in....
Contact: [email protected]
HANDLING=AMAZING, never owned a car with handling like this. Large tach, high redline.
List of stuff done by previous owner which I bought from last May:
The fuel filter, plugs and wires, windshield wipers, TPS,
high-intensity headlight bulbs, wax pellet that raises idle when cold,
water pump, thermostat, hoses, battery, all belts, replaced.
All door, trunk, and roof seals on the convertible top and targa top
replaced with Mazda new ones
The clutch master clinder, hydraulic line, and slave cylinder are all
new. Clutch has about 40k on it.
The back half of the convertible top has two small tears where the top
folds down - almost all RX-7 convertibles over about 10 years old have
this, and mine does not leak
have never drag-raced or street-raced it, and found on evidence that anyone before me had - but I have taken the engine to red line and it revs out fine.
Cons: Leaks a little oil out of rear engine seal, easy fix if u buy/borrow a socket large enough to pull flywheel and get to the leak but it wasnt big enough to justify me spending the money. Also rotarys aren't meant for the mechanically impaired and need to be well taken care of.
PRICE..... Looking for offers or trades (nada guides priced average w/ no options at 4300 * high at 5100...this car is definitely above average and fully loaded with extras looking around $4800 OBO).... reason for sell is Im off to college this summer and cant afford to take this with me. Heres an attempt at some pics, more if interested.
http://123pichosting.com/images/7612100_6004.JPG
http://123pichosting.com/images/6161100_6055.JPG
http://123pichosting.com/images/1454pic6.jpg
http://123pichosting.com/images/342pic8.jpg
http://123pichosting.com/images/698pic3.jpg
http://123pichosting.com/images/9467100_6042.JPG
Model: Rx-7 vert
Year: 1991
Mileage: 130k
Options: ac, pw, pdl, leather, cd, power top, cruise, BBS ALLOYS....pretty much fully loaded
Mods: Mazdatrix short shifter...wants to keep this thing pretty clean & stock. *edit* Forgot to mention pretty much ever hose on this car is steel braided.
Engine: 13B rotary
Condition: Body in great condition, few minor dings and scratches common for all older cars, plastic bumpers still hold glean when waxed. Interior in great shape, original foormats still used which are no longer made. two very small holes in seats and only noticed when pulled apart. never smoked in....
Contact: [email protected]
HANDLING=AMAZING, never owned a car with handling like this. Large tach, high redline.
List of stuff done by previous owner which I bought from last May:
The fuel filter, plugs and wires, windshield wipers, TPS,
high-intensity headlight bulbs, wax pellet that raises idle when cold,
water pump, thermostat, hoses, battery, all belts, replaced.
All door, trunk, and roof seals on the convertible top and targa top
replaced with Mazda new ones
The clutch master clinder, hydraulic line, and slave cylinder are all
new. Clutch has about 40k on it.
The back half of the convertible top has two small tears where the top
folds down - almost all RX-7 convertibles over about 10 years old have
this, and mine does not leak
have never drag-raced or street-raced it, and found on evidence that anyone before me had - but I have taken the engine to red line and it revs out fine.
Cons: Leaks a little oil out of rear engine seal, easy fix if u buy/borrow a socket large enough to pull flywheel and get to the leak but it wasnt big enough to justify me spending the money. Also rotarys aren't meant for the mechanically impaired and need to be well taken care of.
PRICE..... Looking for offers or trades (nada guides priced average w/ no options at 4300 * high at 5100...this car is definitely above average and fully loaded with extras looking around $4800 OBO).... reason for sell is Im off to college this summer and cant afford to take this with me. Heres an attempt at some pics, more if interested.
http://123pichosting.com/images/7612100_6004.JPG
http://123pichosting.com/images/6161100_6055.JPG
http://123pichosting.com/images/1454pic6.jpg
http://123pichosting.com/images/342pic8.jpg
http://123pichosting.com/images/698pic3.jpg
http://123pichosting.com/images/9467100_6042.JPG