What turbo should i get

[Egpwns]

Built r motor

84mm sleeved
je 8:8:1
crower rods
blanced/blueprinted

ported head
ferrea valvetrain
01 itr cams
je manifold port matched 70mm
ericks tb 70mm
aeromotive fuel reg external
aem rail
precision 1000cc injectors

I have a almost complete turbo kit

Need to know what is the best turbo for this setup

wanna yield 650ish

[Retro]

gt35r

[Da Green Man]

GT35R

[UPMotorsport]

GT35r

[Egpwns]

Thanks for the replies


I just priced it up and will get it tommorow

[rocket256]

A GT35R should shine with about 20psi on your motor

[Retro]

with 8.8:1 compression 20 psi aint gonna do shit on his motor, hes gonna have to get up near 30psi to make his "650ish" mark

[CHADbee]

ummmm....i'm gonna say get a 35r or a 62-1 ball bearing

[SPOOLIN]

im gonna give a logical answer and this is if you are set on a garrett, gt40r, the gt35r is not gonna be a "650ish" turbo for that setup EFFICIENTLY, its rated for 400-600hp. Acts of god will make that turbo shine any higher than 600. You wont make higher than 700 with a gt40r efficiently, but if you want 650 or a little more youll want the gt40r OR the gt4094r. Both are not really that much more than the gt35r and are just as nice. if you get the gt40r or gt4094r, your injectors will max out before you max the turbo out.

[Egpwns]

Apparantly it's gonna be 2 weeks to get a gt35r or 40 since that's what my shop says...They want me to go with a Innovative t60-1 dual ball bearing....

[fight club]

go with a 16g.


lol i kid.
but honestly, to make that power go with a gt40r as stated by spoolin. simply because its better to make the power at a lower psi <gt40> than at a high psi <gt35r>

[SPOOLIN]

Apparantly it's gonna be 2 weeks to get a gt35r or 40 since that's what my shop says...They want me to go with a Innovative t60-1 dual ball bearing....

so why dont you call someone that can get it to you within reasonable time. ITS makes nice turbos but they seem to be laggy most of the time.

[josh green]

you can get 4088R's for a pretty good price now since everyone is hopping on the 42R wagon. Go look on honda-tech man. I am sure the prices are better than most shops and they have the stuff IN STOCK READY TO SHIP, and a lot of the time shipping is cheaper or free. Is the ITS a 60mm? If so i dont see it making that kind of power.