240sx Part-out OEM, Turbo, Exhaust

[BuBBa DRiFT]

I have a pignose and a sharknose, sharknose isnt totalled but its cheaper to part it out than to fix, the pignose is totalled in the front.

ALL OEM Stuff is BEST OFFER

I have:

-93 SE Hatch w/ Wing with NO RUST $200
-90 Non-SE Hatch with 4 small holes from aftermarket wing. $150
-OEM Exhaust from '93 $75
-DOHC Gauge Cluster $25
-SOHC Gauge Cluster $25
-SOHC Transmission $100
-DOHC Transimission $200
-Brown Manual Windows/Locks Door Panels $75 pair
-Black Power Windows/Locks Door Panels $150 pair
-Both sets of doors $200 a pair
-OEM Rear Bumpers $75 a piece
-Brown Dash with minor cracks $75
-Black Dash with minor cracks $85
-OEM Tailights $50 a set
-AC Unit $25
-Perfect condition rear quarter panels $150 a pair
-Perfect condition rear quarter Glass $100 a set
-16" Aftermarket wheels $250 bucks (with low pro tires)
-Set of SE wheels with some curb rash $150 for 4
-2 Sets of Seats $200 bucks for front and rear
-Working SOHC with 118,000 miles (still starts) $100
-Working DOHC has oil leak $150
-4 Working Headlights $20 a piece
-Sidemarkers $10 a piece
-Blinkers $10 a piece
-Suspension $20 for set of 2



SPECIAL:

Everything is barely used, about 200-500 miles at the most.

SR20 T-25 no shaft play: $400 obo
SR20 370cc injectors: $300 obo
SR20 Greddy/Trust Sidemount with piping to convert to front mount: $150obo
SSAC Turbo Manifold : $100 obo
5zigen Cannonball 3 inch exhaust (scratches on bottom): $200 obo
XS Power 55mm Saucer Blow Off Valve: $50 obo
Underdrive Crank Pulley: $50 obo

[quickdodge®]

YOU HAVE TO POST PICS AND PRICES FOR ALL THAT CRAP, SMART GUY! Later, QD.

[Ltdnismorace]

you by chance have black door panels in good shape?

[BuBBa DRiFT]

Pictures:

Exhaust:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0424-1.jpg

T25:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0425.jpg

Mani:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0426.jpg

FMIC with piping:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0427.jpg

BOV:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0428.jpg

DOHC KA with 180k (oil leak):
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0429.jpg

Quarter Panels:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0433.jpg

Tail lights (thats removable paint btw):
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0432.jpg

SE Wheels:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0431.jpg

Black Door Panels: This is the the tear in the driver side DP, Passenger side is perfect:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0437.jpg
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0436.jpg

One of the two dashes:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0449.jpg

Lights:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0447.jpg

AC:
http://img.photobucket.com/albums/v219/DXGodfather/IMG_0443.jpg

[RandomGuy]

http://cgi.ebay.com/ebaymotors/KA24DE-T3-T4-Top-Mount-Turbo-Manifold_W0QQcmdZViewItemQQcategoryZ33742QQihZ005Q QitemZ150092950317QQrdZ1

LOL teh same manifold FROM ssautochrome brand new

lol might wanna rethink that price to like 75 bux

[BuBBa DRiFT]

heres your pictures QD!!!!!!!!

[BuBBa DRiFT]

well damn that dropped in price quick...

[BuBBa DRiFT]

ok added/fixed prices and added pictures

come on peeps! IM BROKE!

[babowc]

i need the pass. door with nothing but the door itself and the locking mechanisms.
also, underdrive pulley, from where? for what motor? what size belts? oem size or different?
lmk

[Wurm]

ill take the dohc motor and cluster.... can you deliver

[BuBBa DRiFT]

its an underdrive crank pulley from aggressive i think the name is, its OEM sizing, just half the weight.

the door is gonna run you 100 bucks

[babowc]

door w.o the panels is 100bux?
hows the condition of the door and the color?..

also.. te cluster.
ill take that as well.
lmk
4045189012

[BuBBa DRiFT]

if you give me time to pull it and you pay for shipping, yes.

[BuBBa DRiFT]

door is perfect condition, your choice of yellow or red :)

[babowc]

location?
i might have to just pass on the door.

[BuBBa DRiFT]

Henry County

[babowc]

where exactly is that.. city AND state wise.

[BuBBa DRiFT]

im in Henry County in the town of McDonough about 20 minutes south of Atlanta Georgia.

[babowc]

pmed u

[seksehowy]

JJ if you got signal lights for the sharknose SAVE IT FOR ME ! K THX

[Georgia_boy]

got any pics of the wheels??

[ryan yco]

is the 200 for the tranny for a full swap or just the transmission?

[BuBBa DRiFT]

full swap, bellhousing, ecu (if no one takes it already), clutch, driveshaft

[BuBBa DRiFT]

normal condition SE Wheels, probably best if you got some aircraft stripper on them though.

[BuBBa DRiFT]

i only have one good signal for the sharknose, the other signal on the sharknose is from the pignose :(



JJ if you got signal lights for the sharknose SAVE IT FOR ME ! K THX

[seksehowy]

wait a min.....is this from ur friend's red 240 we saw at varsity? ....>.> i thought u were parting out ur black 240 jj @_@

[turbosx©]

can you sell the whole distributor with clips?

[ryan yco]

if you still have the full tranny swap i will but it but let me know as soon as you can. thanks

[TheGrillMan]

the dohc ka, selling the entire motor or just the cams?

[Georgia_boy]

-16" Aftermarket wheels $250 bucks (with low pro tires)
-Set of SE wheels with some curb rash $150 for 4


^^^^^I want to see these, not the SE wheels.

[babowc]

hey,
ill swing by and get the dohc cluster and the dohc pulley for $60.
lmk.

[hades]

hey man ill buy that dohc ka from you as long a i can get the wiring harness and ecu for it also btw where iis it leaking oil from?????????????:???:

[hades]

hello!!!! im offering money here are you interested ????????

[BuBBa DRiFT]

sorry for the no answer, i didnt think my thread was still alive.

so far the SOHC tranny is gone and i have a pending deal for everything. so if everyone could just have patience i should have an answer as to if im still selling or not. if i am still selling, i will get back to you asap.


and yes, this is my friends red car. he fixed everything and then i hopped a curb lol.

i broke driver side tie rod, cracked oil pan, and the bumper is dropped a little bit. seems to be radiator support.

[BuBBa DRiFT]

someone had the exact same wheels for sale on here, they are an unknown brand, and 16". they are silver and look pretty decent. ill try and find pics. i googled ultra wheels and all i got were truck wheels.... idk but these are 16 inches and fit a 240. i will make my way down towards the SOHC anyways since im trying to go find ryans phone that he left there lol.

[BuBBa DRiFT]

HAH! found em!!!!

http://www.importatlanta.com/forums/attachment.php?attachmentid=86297&stc=1

[carlova78]

hey how many miles on the doch? how does the exaust sound? email me [email protected] thanks! still got the pass. heatlights?

[Georgia_boy]

How much tread left on the tires??

[darrell_prud]

how much for ONE stock SE wheel, new dash, inside door skins w/ window motors, and i need a shofter boot if ya got one.

[FDslider]

PM me with a price for a 91-93 Mass air flow sensor

[nvmysrt]

still wanna sell that turbo? lmk

[kmusgrove]

hey i was wondering if you still had the sharknose and if you do then please email me back cuz i need one my e-mail is [email protected]

[kmusgrove]

hey i was wondering if you still had the sharknose and if you do then please email me back cuz i need one my e-mail is [email protected]

[BuBBa DRiFT]

this thread is a year old, everything is gone haha