Blown B18B1 what do i replace

[fredy123]

Ok well heres the problem. I have a b18b1 on an EF. The engine blew!!! :thinking: uuhm im a lil retarded so how do i say this?... big hole on block... What do i need to rebuild the engine. Maybe a new block with some rods??:thinking: :thinking: Very confused and very stupid so go slow on me. Thanxs in advance.

[Sammich]

best bet:goodjob:



http://passwordjdm.com/product.asp?numRecordPosition=17&P_ID=140&strPageHistory=cat&strKeywords=&SearchFor=&PT_ID=134

[swolejamaica]

new block but get your head checked as well

[fredy123]

Thanks. And no i dont have the money to just dump my b18 and get a b20. Tho the idea sounds great. Do you know anyone that would be able to check it?

[jmmx258]

Any machine shop could check your head. You yourself could actually check the valves. Dump gas in all the ports, exhaust and intake, Hold or set the head down where the combustion chambers are down, and check the valves to make sure no liquids are coming out. Obviously your going to have to pull the cams so all the valves are closed.

If it sits for a while, and you don't see any seapage around any valves, they're good, and all you have to do is have it check to see if its flat or not.

[efman]

dude just pick up a b18 from a parted out integra and put that in, it'll end up being cheaper, and then you can always part out your old motor for alittle $

[jmmx258]

dude just pick up a b18 from a parted out integra and put that in, it'll end up being cheaper, and then you can always part out your old motor for alittle $

Thats true! haha When I broke a timing belt, I was just going to pick up a block for my civic, that was my idea. Somebody else offered to cover me to just get the valves replaced, the head cleaned and decked and so on. That ended up being 500+ bucks when I could've gotten a complete motor for about 400 lol.

[fredy123]

and where could i get a motor for around 400.

[jmmx258]

Well, I was going to post a for sale ad for one, but then I noticed you already posted in it! lol

[Evil Goat]

and where could i get a motor for around 400.

you could get two d series w/ trannys for 400...lol

[fredy123]

where could i get a d series? if its cheaper might ride on the rex instead of selling it. But the rex needs a new engine as well. D series should just slide in there?!

[Evil Goat]

just check the forums....dseries are cheap, and a dseries came stock in an ef, so yes it will fit perfectly, may need to get some stock motormounts though since you have a bseries swapped in

[fredy123]

U made a wrong turn their! THe rex has a single cam. The hatch for which i have to buy the LS has the swap. Which to fix...Ill buy the B series motor. Ride on the Hatch.

[efman]

heres a b20 for 650

http://www.hmotorsonline.com/shop/sc2000search.cgi?what=page&item=30027

[efman]

http://cgi.ebay.com/ebaymotors/JDM-ENGINE-B18B-ACURA-INTEGRA-LS-90-91-92-93-94-95_W0QQitemZ150092805575QQihZ005QQcategoryZ33615QQ rdZ1QQcmdZViewItem

b18b on ebay

shoot i'd by a wrecked integra steal the motor and part it out

[twinj]

MY ringlands are bad in my B18b1. You can buy mine. I have good rods are you would have to do is put you pistons in my and it will be like new. I am selling it for $150 obo. Cant loose with it