Bored..rolling shots

[HachiDori]

http://www.importatlanta.com/upload/files/135/IMG_0087.jpg
http://www.importatlanta.com/upload/files/135/21343.jpg

just 2 for now.


Feedback wanted. thanks

White balance can kiss my ass.

[WhiteAccord]

Very proffesional like... keep up the good work....

[HachiDori]

Thanks..

Anyone else want to chime in?

[Dablaze11]

what kind of rig?

[imbosile]

what kind of rig?


yea, that's what i want to know

[.blank cd]

1st of all, damn. 2nd of all, you should come and take a couple shots of my ride, and 3rd of all, damn

[jmmx258]

You shouldn't tie little kids to your bumper like that lol!

[Sol-Badguy]

Very nice.

Wish my car looked good enough to show it off.

[HachiDori]

Thanks for the feedback guys.

My ex bought this rig for me. www.stickypod.com. I''m going to purchase the longer mount for it. Thats why the pics are so close to the car.

It works ok, hard taking rolling pics of a car with mild cams and welded diff. lol.

Thanks again for the feedback

[Nitro]

hotness. magazine shit there..... :goodjob:

[Sol-Badguy]

Thanks for the feedback guys.

My ex bought this rig for me. www.stickypod.com (http://www.stickypod.com). I''m going to purchase the longer mount for it. Thats why the pics are so close to the car.

It works ok, hard taking rolling pics of a car with mild cams and welded diff. lol.

Thanks again for the feedback
I can imagine.

[HachiDori]

Thanks again!

[speedminded]

Thanks for the feedback guys.

My ex bought this rig for me. www.stickypod.com. I''m going to purchase the longer mount for it. Thats why the pics are so close to the car.

It works ok, hard taking rolling pics of a car with mild cams and welded diff. lol.

Thanks again for the feedbackyou're driving it?!!! As in it's running? :headslap: You push the car for those shots :tongue:

...but I'm impressed it looks as good as it does.

[Nemesis]

You push the car for those shots :tongue:


not always.



Nice shots by the way. Shoot in raw next time and adjust the white balance in PP.

[speedminded]

not always. How many people on here have gyros ;) Aggressive diff and rough running....push it :)

[HachiDori]

The diff in my is about to go out, so for a smooth photo ie. the lines and far the mount not to shake. The car has always been on in every rig shot i do. I couldnt push the car for those. No ps and welded diff, and full interior. g/l with pushing by yourself. As you can see how bad the w/b is the car is a light rx7 blue. It looks purple. But i looks kool i guess.

As far as shooting in raw. I still have to figure it out. Maybe you can help george? pm i guess with a basic for it? lol

thanks for the feedback.

[speedminded]

The diff in my is about to go out, so for a smooth photo ie. the lines and far the mount not to shake. The car has always been on in every rig shot i do. I couldnt push the car for those. No ps and welded diff, and full interior. g/l with pushing by yourself. As you can see how bad the w/b is the car is a light rx7 blue. It looks purple. But i looks kool i guess.

As far as shooting in raw. I still have to figure it out. Maybe you can help george? pm i guess with a basic for it? lol

thanks for the feedback.What camera you using? It should come with a disc to convert from RAW...

oh, i want a gyro for my camera...anyone have $3,000 for me to get one :D

[HachiDori]

350D..I'm not the type of person that can learn by reading something. The way they put it confuses the fuck out of me. SEARCH will be my friend

[Dirty Octopus™]

love it...
when i get to good looking car status ima need a photographer. how much do you guys usually charge?

[speedminded]

love it...
when i get to good looking car status ima need a photographer. how much do you guys usually charge?You don't need a good looking car, just a good photochopper :D

[HachiDori]

Free. I do it for a hobbie. George,matt, and speedminded idk. Couple other good photographers on here.

I'm in need of cleaning and a sharper lense. Don't know were to go with that.

[Nemesis]

I'm in need of cleaning and a sharper lense. Don't know were to go with that.


Camera Repair Japan. Google them. They are excellent at cleaning sensors.

[speedminded]

Camera Repair Japan. Google them. They are excellent at cleaning sensors.They have killer collection of old cameras up front too :goodjob:

[Dirty Octopus™]

You don't need a good looking car, just a good photochopper :D
well can i schedule some before paint pics with you?

[uproot]

got bored

http://www.importatlanta.com/upload/files/5/hachidori.jpg

[HachiDori]

Thanks bro!! that looks kool as hell!!

[.blank cd]

that pic is definitly sig worthy

[A.P. Photography]

Long shutter speeds and a car engine that is running. NOT GOOD BEDFELLOWS. Doesn't matter if it is a bone stock honda or a built 454. I have been with Joey on a rolling shot and talked with several others who shoot for a living and NO you do not want the car running. Best thing to do is invite a couple of friends out to take photos of their car and then flip the script. Tell them that if they want you to take photos of their cars they have to help you first. lol.

Hachi, shots look good man. Not bad at all for them rolling and the car running. If you want to come over sometime I can give you some basics on the RAW thing since we both shoot with the 350D. As for sharper lens, I have a 28-75 F2.8 that I love and it is only about $360. The next lens I get will be the 70-200L F2.8L IS.

[HachiDori]

Thanks, i'll defenetly hold you to that invitation, and take that advice.


Thanks for the great feeback you guys.

[StupidBikerBoy]

Great pics!

But your speedo shows 0:thinking:
:ninja:

[HachiDori]

The speed was 0 lol i just let off the clutch reall quick to get the car to roll. lol your can see the rpms coming back down. I actually think i stalled the car on shot. lol

Thanks

[Buford®]

Always great photography, Ferny. Hit me up later if you want.

[HachiDori]

Ferny, lol. What if I don't wanna? lol

[Nemesis]

interesting advice.................. hmmm

[YokotaS13]

The next lens I get will be the 70-200L F2.8L IS.
Best investment you will ever make

i love my f/4 i shoulda waited for hte 2.8 though

[speedminded]

interesting advice.................. hmmmYou can thank Todd Corzett, the advice is straight from him ;) http://www.unitonestudios.com

Now with a daytime rig shot you can get away with a faster shutterspeed and driving but i still don't know about a rough running car or sharp turns with a welded diff...i'd still use a gyro :goodjob:

[Jaimecbr900]

Nice shots. I like that you did it yourself and figured it out.

Thanks for the link too. I think I'm going to get me one of those sticky pods. :goodjob:

BTW, as Jorge suggested, if you shoot in RAW you will have an easier time correcting WB. You got RAW conversion software with your camera. It is pretty basic and easy to use. If you can use PS, you can use that software.

[speedminded]

Nice shots. I like that you did it yourself and figured it out.

Thanks for the link too. I think I'm going to get me one of those sticky pods. :goodjob:

BTW, as Jorge suggested, if you shoot in RAW you will have an easier time correcting WB. You got RAW conversion software with your camera. It is pretty basic and easy to use. If you can use PS, you can use that software.
For shooting car to car or serious rig shots ;)
http://www.ken-lab.com/stabilizers.html

[Nemesis]

You can thank Todd Corzett, the advice is straight from him ;) http://www.unitonestudios.com




Thank you Todd Corzett

[Jaimecbr900]

For shooting car to car or serious rig shots ;)
http://www.ken-lab.com/stabilizers.html

Ummm, that's very nice but a tad overkill for any of us here..... :D

You can actually make your own rig for those rolling shots, but it requires a little more ingenuity than I have. :D

I like the convinience of the rig Hachidori put up. Besides, you can only take so many rolling shots anyway, you know? It is nice to have something like that, but I just can't see a $4k investment on it unless National Geographic is paying for it. :D

[speedminded]

Ummm, that's very nice but a tad overkill for any of us here..... :D

You can actually make your own rig for those rolling shots, but it requires a little more ingenuity than I have. :D

I like the convinience of the rig Hachidori put up. Besides, you can only take so many rolling shots anyway, you know? It is nice to have something like that, but I just can't see a $4k investment on it unless National Geographic is paying for it. :DYep, definitely overkill unless you can really get full use out of it, especially since i can get the two lenses i want for that price, but you can rent them for $50 a day...i'll need one about once a month pretty soon ;)

[HachiDori]

Thanks again. I'm still working on getting better rig shots. They are just more fun taking.

Any tips for rolling shot's and making more rigs lmk

[speedminded]

Thanks again. I'm still working on getting better rig shots. They are just more fun taking.

Any tips for rolling shot's and making more rigs lmkLink for ya: http://www.automotiverigs.com/

Just keep practicing, alot of creative things can be done with rolling and rig shots...

http://www.unitonestudios.com/_Other/Camaro/050901_20081x.jpg

http://www.sevenphotos.com/dev/wako/wako_001.jpg

http://www.sevenphotos.com/dev/the_nur/nur_003.jpg


Rig shots (PS'd to remove arm):

http://is.rely.net/1-5120-58194-l-9xLQ3QEnipO1HbX3STbnfg.jpg


Tomer Feder, a veteran at rig shots: http://www.lightstalkers.org/tomer_feder
http://www.lightstalkers.org/photo/jpg/6/7/120776/large/s500.jpg

http://www.lightstalkers.org/photo/jpg/2/8/120782/large/_________________.jpg

[Jaimecbr900]

...i'll need one about once a month pretty soon ;)

Really??? Whatcha doin??? :thinking:

[HachiDori]

Speedminded,

http://is.rely.net/1-5120-58194-l-9xLQ3QEnipO1HbX3STbnfg.jpg

This is what im wanting to practice on.

[speedminded]

Really??? Whatcha doin??? :thinking:hrmm...just having fun playing ;) :camera:



Speedminded,

http://is.rely.net/1-5120-58194-l-9xLQ3QEnipO1HbX3STbnfg.jpg

This is what im wanting to practice on.that's a rig shot, see the first link i posted in that post and it's setup just like the bimmer on the main page....then it's really easy to crop out the aluminum arm.

[HachiDori]

Ghetto Fab has just started, $700 for a rig, I no think so. I always thought there was a technique (sp?) for that kind of shot. No rig. Good thing I use photoshop at work daily.

Post pics of the replica rig when its done.

[speedminded]

Ghetto Fab has just started, $700 for a rig, I no think so. I always thought there was a technique (sp?) for that kind of shot. No rig. Good thing I use photoshop at work daily.

Post pics of the replica rig when its done.i know where lots of 1½" aluminum pipe is in 20ft. sticks, i'm checking to see if it's still available ;)

[HachiDori]

lmk, cause im serious about this, I'm not paying $700 for a rig. Photos that i will only share with you guys. lol

[BuBBa DRiFT]

i like those pics a lot!!!

[Revmaynard]

Is it your car even movin'? Your speedo is at nada, unless it's broken.

[HachiDori]

Yeah, like .0005mph if that makes sense. I just eased the clutch out and pressed it again once i got the car moving abit. If i had ppl with me i wouldve pushed it.

[Revmaynard]

Haha, yea.