Log in

View Full Version : 350Z FACTORY SEAT FOR SALE!


CapnNismo
02-06-2007, 04:46 PM
This is a driver's side seat. I wanted to put this into my 240sx, but I changed my mind and got some s14 seats instead.

Price is $150.

It is a manual seat from a 2003 Performance 350Z. Here are some photos, too.

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3969.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3970.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3971.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3972.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3973.jpg

http://img.photobucket.com/albums/v284/CapnNismo/IMG_3974.jpg








There is a little bit of wear on the outer lumbar support because this seat came from a daily driven 350z. But it is still VERY supportive and the cushioning is all still there. There's a bit of dirt on the bottom of the seat that I need to clean off because it's just been sitting in my garage for two weeks now. It'll come off, though, so no worries there.
Cool Cat Racing
02-06-2007, 06:48 PM
Would help if you listed a price David.
CapnNismo
02-06-2007, 07:31 PM
Damn, thought I did. Sorry.

$150
Benefit
02-06-2007, 09:24 PM
they fit in ur s13?
Krappy
02-06-2007, 09:49 PM
needs to be modded...PMed u
CapnNismo
02-06-2007, 10:05 PM
I have yet to do a test fit (that will come tomorrow morning). But the inside rear bracket I know for sure will have to be modded to fit any S-chassis. It seems like a pretty simple one, though. Just cut off the bracket and weld it back on in a different direction.
CapnNismo
02-07-2007, 11:53 AM
I just went and did a test fit and all four brackets would need to be modified. The two on the front poke out at more of a straight line than the one's on an S-chassis, so those might be able to simply be bent down. The one in the rear is the opposite, it needs to be straightened out a bit. And then the one on the side, of course.

It seems like it would be a pretty straightforward modification for anyone that can weld. Nothing really confusing by the looks of it.
Cool Cat Racing
02-09-2007, 09:14 PM
Bump
CapnNismo
02-09-2007, 11:01 PM
Thanks, Ryan.

The seat is still very much for sale. I've talked with a guy that took two 350z seats and stuck them in his 240sx and he said all he did was weld on S13 brackets. Just cut off the 350z brackets and welded on S13. Said it was very easy to do and also very safe and sturdy (for any that were wondering).
turbosx©
02-11-2007, 04:33 PM
how much would you say the seats weigh(sp)?
CapnNismo
02-11-2007, 04:52 PM
The seat weighs ~37 lbs. According to the scale at UPS.
Krappy
02-11-2007, 05:09 PM
i got 100 stil...
CapnNismo
02-11-2007, 05:22 PM
That's fine.
Krappy
02-11-2007, 05:29 PM
That's fine.
are you saying you'll take 100 or no ur turningmy offer down?
CapnNismo
02-11-2007, 09:14 PM
Turning it down. I've currently got an offer pending with another IA member. But I'm open to a bidding war, lol.
Fr33way
02-12-2007, 12:11 AM
Very good deal on this seat. Will be very interested if you still have this around in a few weeks (doubt it).
CapnNismo
02-12-2007, 09:29 AM
If I do, I will bump it up.
Djlin
02-12-2007, 09:52 AM
dang. great price.. if only i still had my s13 lol
CapnNismo
02-23-2007, 08:45 PM
The seat is still very much for sale. I had a deal that was supposed to happen this Saturday but it fell apart.

I will deliver anywhere you folks want as long as you cover the cost. I'm willing to drive as far as downtown Atlanta for an extra $25. This is a steal people. Don't let this slip away from you.
babowc
02-24-2007, 12:24 AM
it weeeeel be minE!
anyone want to join me for a trip down to mac town? lol
ORRR! ^ is selling other parts,
i can go get it for you if you need.. lol
i just dont want to go down for a seat, but i have to.
CapnNismo
02-24-2007, 12:28 AM
I've got my HKS BOV and turbo timer for sale ... $300 if you buy them together.

$110 for the timer, $200 for the BOV
CapnNismo
02-24-2007, 11:02 PM
Seat is no longer for sale.