View Full Version : dc gsr part out
mccoy1178
02-03-2007, 07:25 AM
hey guys im partin out a white dc gsr. I have the more but this is the bulk of things:
1- Tanabe Racing Medallion catback $275
2- Complete Rear disk brake (with polyurethane bushings) $175
3- DC polished front upper strut bar $100
4- 3 pod gauge pillar w/ gauges (exhaust temp, a/f, oil pressure) $100
5- Ground control rear sway bar w/ hardware $150
6- Tokico Illuminas w/ Ground control coilovers $325 (tokico only $200, GC coilovers $150) better deal bout together SOLD
*note: the rear strut is missin the plastic pc to adj the shocks but i think u can use a fine needle nose plyers to adjust them. so for that price change. Sorry forgot to mention
misc stuff:
7- Greddy evo 2 Axle back (rewelded piping bc of rust, i bout it used like that) SOLD
8- 17" Focal wheels w/ tires (on tire needs to be replaced) $250
*if u guys need anything from a dc, i wil have it bc the car is still complete but no motorset. thanx in advance IA
Mccoy
mccoy1178
02-03-2007, 07:26 AM
more pics
Dirty Octopus™
02-03-2007, 08:34 AM
yo MCcoy! how much you want for that rear sway bar?
puregroove
02-03-2007, 08:46 AM
hmmm, those GCs look familiar :yes:
-S Double C-
02-03-2007, 08:50 AM
pm'ed :goodjob:
mr.koupe
02-03-2007, 08:51 AM
pm'ed :goodjob:
mccoy1178
02-03-2007, 10:15 AM
pms returned!
mccoy1178
02-03-2007, 10:45 PM
no one needs parts anymore?
soon_2_k20
02-03-2007, 11:55 PM
got the dizzy the engine harness and the iac valve let me know need asap
JDMJAYDC2
02-04-2007, 01:04 AM
need pass. fender liner with clips as well as the cardboard piece for the trunk pm me with a price
k20typeR
02-04-2007, 02:57 AM
Ill trade you a replica mugen front strut for that polish dc strut
mccoy1178
02-04-2007, 08:02 AM
jdmjaydc2-sorry no fender liner
k20typer- i already have a mugen replica in the garage. u got anthing else.
thanx again IA
Mccoy
slo4door
02-04-2007, 12:40 PM
What would you take for the Oil Pressure Gauge? And is it mechanical or electrical? Thanks.
drtyhatch
02-04-2007, 01:53 PM
i really really want the tanabe but it looks like factory exhaust pipe with the tanabe axleback, if thats the case then i'm not willing to pay that much for it. i wouldn't mind just having the axle back though.
blacknightteg
02-04-2007, 02:02 PM
yo....wana trade the medallion for an EVO 2 catback?
efman
02-04-2007, 02:18 PM
leather seats ??
blacknightteg
02-04-2007, 02:28 PM
what else you got that you can part out that you dont have listed....
mccoy1178
02-04-2007, 05:17 PM
i will double check the tanabe catback bc its bigger piping then oem. sorry no trades bc i need cash.
the oil pressure is mechanical i believe. sorry has cloth black seats in mint condition. pm what ur looking for. thanx alot
Mccoy
FrankenSTI
02-04-2007, 07:24 PM
Do you still have the coilovers?
mccoy1178
02-04-2007, 07:31 PM
frankensti-has i do let me know if u want them. have alot of interest but no money yet. lmk thanx
Mccoy
FrankenSTI
02-04-2007, 07:42 PM
I have the money. the only problem I have is there for my girl but she has a 93 and i dont think they will fit.
JDMk24coupe
02-04-2007, 07:51 PM
well i dont think they fit da's...so if you still have them i will come get the coilovers and the shocks right now...lmk.(i sent you a pm too)
mccoy1178
02-05-2007, 07:06 AM
i change the price of the suspension for missin adj part
mccoy1178
02-05-2007, 10:52 AM
suspension is pending to jdmk24coupe today
mccoy1178
02-05-2007, 04:49 PM
supspension sold to a good guy. now IA buy my other junk. thanx
Mccoy
lsxtreme
02-05-2007, 08:58 PM
thanx for teh stuff mann..
mccoy1178
02-06-2007, 07:02 AM
shoot me some offers.
mccoy1178
02-08-2007, 08:47 AM
still available
puregroove
02-09-2007, 10:00 AM
still have the engine harness or did it go with the motor?
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.