View Full Version : WTB DA front spindles or possibly whole brake swap!
DrunkScotsman
01-28-2007, 07:07 PM
lmk what you got ,thanx
DrunkScotsman
01-28-2007, 07:54 PM
ttt
SKUNK2GUY
01-29-2007, 12:28 AM
talk to thechosenone he's parting out my old da it needs rotors but he should still have the cross drilled rotors i gave him you could get front and rear prolly from him
DrunkScotsman
01-29-2007, 06:53 AM
thanx!
bigdare23
01-29-2007, 09:33 AM
Is your civic a base (4spd)? If not you don't need these unless you want to upgrade.
GermanMuscle
01-29-2007, 12:02 PM
you can also get them from a 94+ integra, they are the same as the da
mccoy1178
01-29-2007, 01:11 PM
im partin out a 97 integra. i got the front and rear disk brakes if ur interested. $200 for front and rear if u pull, $250 ill pull them. lmk thanx
Mccoy
DrunkScotsman
01-29-2007, 03:58 PM
i counted the splines on the hb and axles , not gonna match up
bigdare23
01-29-2007, 04:00 PM
i counted the splines on the hb and axles , not gonna match up
double check cuz if you was using a dx or si tranny then it should work.
DrunkScotsman
01-29-2007, 08:40 PM
i'll check it out in the mornin!
DrunkScotsman
01-30-2007, 05:23 PM
bump
BTLFED
01-30-2007, 05:34 PM
DA knuckles will throw off your camber, FYI. And if you are going to do front and a rear disc brake conversion make sure you get the e-brake cables and the Proportioning valve.
DrunkScotsman
01-31-2007, 03:45 PM
i just tried to use my axles that came with the swap and they didnt fit in my hubs!
Pavlo
01-31-2007, 04:01 PM
Check Pull-a-Part they had 2 DAs with full rear disc swaps, no fronts though.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.