quick questions about the 1st gen b16a

[bigdare23]

My first question is, do I buy parts from the 99-00 civic si or del sol vtec for the b16a?

Next question is can I use an aftermarket crank pulley from b18a/c or b20b/z on the it, because I got this nice race pulley (kills the a/c) for a LS swap I was doing that I would love to use on the b16a.

Last question, can you use a type r water pump on it? If so, would I benefit from it?

Thanks for your help!

[2.0civic]

typer and gsr pumps are the same part number which is why its funny when i see "gsr with type r pump"

what parts for the b16 are you looking for? the ac needs to be sol (im assuming in a sol or hatch) but the others dont matter depending on what it is

[bigdare23]

Sorry about the lack of info. The motor is obd0 going into a crx. I was talking mostly about belts, seals and gaskets. I already know I got to used some obd0 ls parts like clutch, starter, alternator, and axles. Just trying make sure I get everything right the first time, so I don't be running back and forth to the auto parts store.

[2.0civic]

honestly i think they are the same but if imnot mistaken (probably am lol) i think the water pump may be slightly different so it may be a shorter or longer tbelt but im not 100%

LIRL wait for mike

[KevinT707]

Alot of the time you'll be using 90 Integra DA parts, like for the CV axles, alternator, starter etc. For the belts, seals, and gaskets use 99-00 Si B16 parts. Fuel filter, just get one for a CRX .. not sure if it's the same as a DA

[bigdare23]

Alot of the time you'll be using 90 Integra DA parts, like for the CV axles, alternator, starter etc. For the belts, seals, and gaskets use 99-00 Si B16 parts. Fuel filter, just get one for a CRX .. not sure if it's the same as a DA

cool :goodjob:

[twinj]

good useful information