OzSportz Garage Sale #2

[Annihilation]

LAST UPDATED 12/07



OzSportz Garage Sale




CLICK PICS TO ENLARGE






ENGINE/TRANNY Parts

JDM DOHC F22b LONG BLOCK with dizzy
Complete With Wire harness
$500 for engine




B16 VTEC Head pretapped for ls/vtec
p73 Intake Manifold
Dual Valve Springs
Retainers
Valve cover
POrt & POlish Intake Ports
Vtec Solenoid Included
Cam Caps Included too(not pictured)
gsr cams
$650












[/size]

TURBO RELATED

Autometer Carbon EGT
carbon fiber back plate 90$ comes with sensor and wires
http://www.importatlanta.com/upload/files/414/Photo_042307_001.jpg
http://www.importatlanta.com/upload/files/414/Photo_042307_002.jpg
Dyno Tune Digital Readout A/F gauge
(does not need wideband) hooks up to stock o2 sensor and gives digital reading,
heres a chart that shows the readings: $60







pics on the bottom





Garrett/Turbonetics T3/T04b
http://www.rbracing-rsr.com/turbo/TurboMaps/t04b-s3.gif
S trim Compressor Wheel
T3 Turbine Flange inlet
5 Bolt Down pipe flange
63 A/R Turbine
Polished Compressor Housing
5k Miles....
$400

Turbonetics T04B
http://www.importatlanta.com/upload/files/414/Photo_041607_003_edited-1.jpg
http://www.importatlanta.com/upload/files/414/Photo_041607_002_edited-1.jpg
http://www.importatlanta.com/upload/files/414/Photo_041607_001_edited-1.jpg
360 degree Thrust washer and seal/bearing
http://www.rbracing-rsr.com/turbo/TurboMaps/t04b-h3.gif
H Trim Compressor Wheel
P Trim Turbine Wheel
T4 Inlet Flange
V-Band Turbine Outlet
81 A/R Turbine
Polished Compressor Housing
100miles
$500


[/size]NEW GARRETT T6 TURBO $350 great for 6 or 8 cyclinder
Good to 1000hp
110mm wheel
http://www.t-mobilepictures.com/photo/photo26/33/d4/80b44697045e.jpg?tw=305&th=228&_rh=395sfcync74r6sk6lvr5qp4ru
http://www.t-mobilepictures.com/photo/photo22/db/4a/4d71ab8345da.jpg?tw=305&th=228&_rh=92xp2qxazoj8aakvg1el7dltb












Sr20det Turbo Exhaust Manifold

$40
https://www.t-mobilepictures.com/photos/photo13/d1/19/8e1327b88b89.jpg?_rh=cs26m3enbe4oht4yh8ywfac3l







WHEELS

Enkei
(4) wheels Good condition
4x114.3 lug pattern
Red with lip
$300

16" 5 lug Universal Wheels
(4) 5 lug universal WHeels
White
No curbage
tires 205-50-16
$250




MORE **** WILL BE LISTED...Almost Daily





Contact Info:



Name: Oz



Phone 404-488-3358 Leave a msg if no asnwer



This needs to be a sticky at the top.....paypal payment being sent

[an0therh22]

bump for soem good shit

[KA98S10]

pm'd about cams

[UpSideDownDesi]

bump

[ctzfinest18]

how long u think those shocks an springs will last?

[SLow_POke]

how long u think those shocks an springs will last?



longer thne EBAY ones :eek: :goodjob:

[v-tech]

what do u want for just front and rear shocks

[Annihilation]

what do u want for just front and rear shocks

not really wanting to part out but $150

[an0therh22]

got anything for a h22 oz? or some suspension for accord?

[2.0civic]

HMMM...HOW IS THE 14G?/ ANY SHAFT PLAY AND ARE THE SEALS GOOD?

MIGHT BE REBUILDING THE OLD D SERIES....

[Annihilation]

HMMM...HOW IS THE 14G?/ ANY SHAFT PLAY AND ARE THE SEALS GOOD?

MIGHT BE REBUILDING THE OLD D SERIES....ITS IN AWESOME SHAPE little to no shaft play

boosted well on a eclipse... no smoke at all... he upgraded

[LiL PaKi]

lemme get the turbonetics bro!!!

[RidingHigh]

http://forums.importatlanta.com/showthread.php?t=103640&page=2

Beware of this seller.

[Vteckidd]

http://forums.importatlanta.com/showthread.php?t=103640&page=2

Beware of this seller.
ARE YOU POSITIVE THAT HE BUILT THAT MOTOR?

because unless your the owner an tell the whole story, donjt ruin his FS thread.

if you want to make a BAD BUYER POST, POST IT IN THE SELLER/BUYER FEEDBACK FORUM

[RidingHigh]

postive. EG2 can back it up.

[2.0civic]

postive. EG2 can back it up.

no offense but hes not exactly the most credible person on the board

[o0oVteco0o]

i also can back it up, about 50% members on this board knows about this, words grow fast trust me, ALMOST EVERY ONE ON THIS BOARD, knows that oz had built this motor.

[2.0civic]

i also can back it up, about 50% members on this board knows about this, words grow fast trust me, ALMOST EVERY ONE ON THIS BOARD, knows that oz had built this motor.

apparently not since when the other thread got made, nobody knew who built it

[o0oVteco0o]

because the one who kew about this motor didnt read that thread just yet. i will send that link to them, they know who had built it, dude you was just now speakin with the owner brother in that thread. what more do you need to know who had built it? i probably wasnt there when he built it or done the swap but i sure knew that he had built it.

[an0therh22]

well why dont u guys take this to another thread and keep it out of his fs thread. Oz does alot of work on my car so i doubt he would take any shortcuts out of any build.

[Annihilation]

Shocks and springs sold

[Annihilation]

TD05 turbo sold

[Annihilation]

http://forums.importatlanta.com/showthread.php?t=103640&page=2

Beware of this seller.


Thanks for your BS.....

Brought me more Business Though..........HAHA:D:cheers:

[Annihilation]

Turbonetics T3/T4 sold
VAFC2 SOLD
CTR PISTONS SOLD

MORE SHIT ADDING TODAY

[integra8705]

pmed

[JDMJAYDC2]

any b16 heads or ls heads i need the ls head quicker though

[scrxils]

Bump

[Black Mamba]

any wheels for sale?

[an0therh22]

im looking for an itr spoiler oz call me or send me a pm.

[$Dark(NSX)$]

yo man will the b16 block be a smart choice for my integ?

[Annihilation]

yo man will the b16 block be a smart choice for my integ?


Not if your trying to go for speed....something for jus a DD or if you neeed a good block..its fine....but speed..no...not enough torque

[ghb2oo1]

got any H22 parts for me???

pm if so...

looking for cams, S2 pros, JUN3' exhaust, Type-s intake, etc... something along those lines, maybe even crower stage3's (if they don't break)

Also looking for race header (sms, rmf, an-r, prospeed, etc...)
Large TB possibly tapered i.e. 70-68mm or so
S2 or euro R intake mani
3" itr intake replica

etc...

sry for whoring the thread.

Bump for good seller

-donnie

[Annihilation]

Shit Added

[Jayman66]

Hey do you still have the b16 block if so please call me @ 973
261
0987

[IndianStig]

Oz, you still got that h22 turbo manifold? Is if to 97+ or 92-96?
Flexible on the price? I'm thinking of turboing. If not, i'll find you a buyer for like $10-20$ in finders fee.

[RandomGuy]

Oz, you still got that h22 turbo manifold? Is if to 97+ or 92-96?
Flexible on the price? I'm thinking of turboing. If not, i'll find you a buyer for like $10-20$ in finders fee.fucking lowballing desis

shit if he wants it he can buy it... if he dont want it , dont buy it... lol finders fee wtf is this fuckin real estate, fuckin dumbass.

[loneSTAR]

Better pics of the comp cams please, siR

[loneSTAR]

nevermind.... you must like them

[bkou]

300 for the GARRETT T6 TURBO

[Annihilation]

T3/T04 SOLD

[Annihilation]

B16 Block Sold

[b16acrx]

can I get some better pics of the cams ?

[Boostedek]

oz sell me the EG shell at your house..

[Black R]

so you have three sets of skunk2 stage2 cams? and you're selling each set for $250?

[1136]

he's on vacation right now. should be back in town on the 28th

[Annihilation]

NEW SHIT ADDED

[0p7!mu5]

hey sorry bout last sunday man. Its Paul btw.had a fam emergency. I can try to swing by this sunday for the kit install if ya dont mind. oh btw what else ya got?

[TheChosenOne]

is any of this stuff still for sale?

[Annihilation]

I deleted wat has been sold...I will update with New list later today