new parts for lucy thought i'd share

[mocha latte cupcake]

ok guys so since i had to tell someone i thought i'd tell some fellow nissan whores! i got my E manage this weekend, not the ultimate yeha i know i know :blah: and i just found a set of NISMO struts and RS*R race springs to replace my stupid AGX's and Eibachs! more JDM parts for me the JDM ****. just thought i'd share :cheers:

[.MuNKeY.]

post some pics JM!....how's it livin?

[N/A EK]

Nice

[mocha latte cupcake]

Struts and Spring en route now baby! can't wait to install them, anyone wanna buy eibach sportlines for 150 :D

also, got my greddy e manage (not the ultimate) :blah: but i'm happy about it!

[Kyle]

Ghey greddy e manage is not the ultimate. GTFO.

[mocha latte cupcake]

hey bite my mr. my 1.8 has a turbo the size of an acorn. my shit is way mo JDM! and i'm proud of her.... besides this is my thread biatch!

[Kyle]

Haha, well my turbo is over 10000000000x bigger than yours because you don't have one. Thus by volume yours is 0cc, so hahaha riceboy.

I invade your threade once again.

[mocha latte cupcake]

whats funny is the 3 KKK03's i have sitting in my room say otherwise :D vw turbo's owned by a nissan b/c all the nissan turbos out there are still working and like all vw's they break and become my paper weight beaches lol

[Kyle]

How many psi's are those turbos running?

[mocha latte cupcake]

0 like all v dubs should.... and since this is a nissan only household i run here, i refuse to let them attempt boost! and i starve them of oil! :taun: all hail nissan king of the land!

[Kyle]

0 like all v dubs should.... and since this is a nissan only household i run here, i refuse to let them attempt boost! and i starve them of oil! :taun: all hail nissan king of the land!
http://youtube.com/watch?v=_mWUGdzUyA0
Turbo VDubs FTW?. :bump:

[mocha latte cupcake]

lol lol yeah yeah yeah, and i'm sure i'll see him next week in gossett for all the recalls he needs and how he blew the maf and his injectors are locking out! bwhahahaha

jk i got love where its due, we have one in there now that is looking to put out 500 whp. go jetta go turbo inferno go jetta go!

[~The_Duke~]

0 like all v dubs should.... and since this is a nissan only household i run here, i refuse to let them attempt boost! and i starve them of oil! :taun: all hail nissan king of the land!

Mine is louder...lol

I fixed the issue BTW...JB weld that spark plug antifouler and 20 mins of hardening time...tomorrow I go get a real plug...

[mocha latte cupcake]

lol please tell me your going to be careful when you try to remove that anti fouler since you put JB weld on it lol, careful it doesn't Fugg up the threads! also, yeah man, just get someone to enlongate the wires on the downstream O2 and get a bung welded after the cat, it cost me like 25 dollars at meineke when i did it on my spec. and if the CEL comes on after that see if your eligible for the recalls on the ecu. lol i got that letter from nissan the day after i totalled mine lol. its cool though, i went there with all my reciepts from having them clear my CELs and walked out with 600 cash! woot woot!

[mocha latte cupcake]

also i'd like to add that i got my exhaust on now :D no its not JDM persay because no one makes the GReddy or HKS anymore and people wouldn't sell it and ship it to me for 550 bucks! i mean seriously so its not like i tried, but i did get the JDM angle and slant on with it and it came out surprisingly well. i get alot of compliments on how deep the tone is and how good the angle looks. i'll be able to post pix soon i hope!

[~The_Duke~]

lol free money FTW. Ya mine is a 2005 and they didnt have any of those recalls on it...that I know of and it is still working fine.

Ya I didnt get any of the JBweld on any of the threads or any of the rest of the antifouler. I only put it on the inside of it to make it air tight. :goodjob: I am going to take it out and put it back in when I get off work just to make sure the JBweld is holding up to the heat ok.

[Kyle]

lol lol yeah yeah yeah, and i'm sure i'll see him next week in gossett for all the recalls he needs and how he blew the maf and his injectors are locking out! bwhahahaha

You will never see me at Gossett!!! I hate that place.

[mocha latte cupcake]

You will never see me at Gossett!!! I hate that place.

:goes and loosen kyles coil packs and mass air wires muhahahaha :taun: see ya soon buddy!:


i mean, yeah i know you had a bad experience i'm sorry i don't know why people would ever want to go there :hehehehe: :ninja:

[~The_Duke~]

and here we thought yousef was the terrorist, when it was you all along...

[mocha latte cupcake]

their here! their here! :bump: :bump: :bump: :bump: :bump: :yay:

my nismo struts and RS*R springs are officially here! i'll post pix soon! i <3 my jdm habits and the availability of swapping parts from cars

[~The_Duke~]

I smell a mountain run in your future...

[MR. 200SX]

How many psi's are those turbos running?


Mine was running 12psi when I dyno'ed 260whp/270whp and ran a 13.3@109 with a 2.2 60FT. That was with my little T25.

200sx SE-R FTW!

[HalfBaked]

My nissan t25 made 300ftlbs.

Damn nissan turbos.

[Ltdnismorace]

ever get pics of the nismo sturts and RsR coils?