rotary engine parts (S5)

[SLOWR/T]

i have an S5 engine im parting out i took it apart this past weekend. it had a blow coolent seal, but i assume the housing, rotors, irons and other parts are still good. the motor was complete except the TB everything else was there. heres a list off the top of my head

rotors and housings.......... $100

stock irons...........$50

front cover .............make offer

e-shaft ...........make offer

intake manifold upper and lower.............$75

fuel injectors and fuel rails.......... $50 (prob best to have them cleaned)

wiring harness....................$50

oil pan w/ bolts..............make offer

im not looking to make alot of money so the price are neg.


this was the motor together the "keg" part
http://i7.photobucket.com/albums/y266/NAFC3S/Picture369.jpg

here it is apart (before i cleaned it up)
http://i7.photobucket.com/albums/y266/NAFC3S/Picture363.jpg

this was after i pulled the back iron off
http://i7.photobucket.com/albums/y266/NAFC3S/Picture361.jpg

and the last is of the motor before i touched it
http://i7.photobucket.com/albums/y266/NAFC3S/Picture346.jpg


all parts are S5. if any one want any different pic ill be happy to get them.

thanks for looking

[SLOWR/T]

oh some pieces broke coming of like the little plastic oil lines and other were in bad condition so most small parts as for the vaccum lines and stuff were thrown away

[SLOWR/T]

bump

[SLOWR/T]

Bump!!!!