Page 1 of 2 12 LastLast
Results 1 to 40 of 57

Thread: PRO NON-VTEC BUILD : YUMMY

  1. #1
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default PRO NON-VTEC BUILD : YUMMY

    I've got my built/sleeved non-V setup for sell guys. This motor was LOADS of fun on the base-tune with Crower 404s. It now has 405a's for the ultimate lope and kill factor. Just refreshed by Matt at MSSRACING (needs no introduction). Originally worked with Javier at JGE for the initial build. There are some vids of me pulling built b20vs somewhere around when it was in the wagovan. There are also some vids of me taking down juiced B seriess in Utah. All of that was on the 404s and no spray. There are some turbo take-downs w/ just the 80 shot wett I had... and some more turbo take downs on the 100 shot wet setup as well. Price depends on what you want - I COULD be interested in splitting the setup - but only the block/head - for example, NO you can't have the cams unless you want the head, etc.

    If you don't make 180 MINIMUM with cam angle changes then that means you and your tuner are idiots. But I have a feeling with the new 405a's installed you're gonna be closer to 200whp if you know your stuff.

    BOTTOM END:
    * 84mm Sleeved
    *Power hone with sunnen AN300 stones
    * Decked block surface
    * GSR m
    icropolished crank
    * ACL m
    ains
    * ACL rod bearings
    * thrust bearings/ OEM
    * new oil pump (ITR)
    * u
    ltra light connecting rods
    * comp ratio 11.6

    HEAD (i like head)
    * P8R (JDM B20) Pro series cylinder head
    * full race port and polish
    * full race valve job
    * titanium retainers
    * dual valve springs
    * stainless steel valves (1mm over on exhaust side)
    * new valve seals
    * resurfaced

    Charles @ MSPI doing the initial assembly after delivery from CA

    :

    :

    :



    If I don't get any serious offers - I'll put it in my EG, install the nitrous and take your lunch money. 9k rpm non-vtec shifts are sexy. Ask your mom - she likes it. BUY ME
    Last edited by BABY J; 01-25-2013 at 12:34 PM.
    "I'm not a gynecologist... but I'll take a look."


  2. #2
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    39
    Posts
    6,449
    Rep Power
    26

    Default

    So it never cracked 200hp?

  3. #3
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    Not on the 404s (set to 0.0) - and not on motor. Nitrous doesn't come with the sell. But if someone needs help setting up a "pro" nitrous setup with or w/out a nitrogen push I can get them going in the right direction and may have some hardware to throw their way.

    This was a nitrous build from the beginning.
    "I'm not a gynecologist... but I'll take a look."


  4. #4
    www.MSSRACING.com SPOOLIN's Avatar
    Join Date
    Aug 2005
    Location
    Northwest Georgia
    Age
    35
    Posts
    5,777
    Rep Power
    21

    Default

    if you are going to mention nitrous, you might wanna add that the current rotating assembly as never been sprayed. lol
    www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
    Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel

  5. #5
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    Oh - BTW - we did a break in tune, and the 404s were at 0.0 - the 404s are/were NOT weak cams in this block - but rather than tune for cam angle changes, I opted to move to the 405s's --- they were unobtainable at the time the build came together (the REAL 405s, not the new ones).

    Quote Originally Posted by SPOOLIN View Post
    if you are going to mention nitrous, you might wanna add that the current rotating assembly as never been sprayed. lol
    Right - this a 0 mile rebuild performed by the dork who posted above me. He "kinda" knows what he's doing. I think he's hit mid 12's in his hatch or something. 12.5 @95mph I think. LOL
    "I'm not a gynecologist... but I'll take a look."


  6. #6
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    The RMF Narrow doesn't come with the sell either. If you REALLY have your heart set on a real RMF Narrow - I have 2, 1 mint, and the other slightly modified - but it's gonna be hard for me to part with them unless I really decide that I'm done w/ Hondas or the B series for good - which isn't currently the case.
    "I'm not a gynecologist... but I'll take a look."


  7. #7
    Senior Member | IA Veteran 1civic's Avatar
    Join Date
    Oct 2005
    Location
    Douglasville
    Age
    39
    Posts
    6,449
    Rep Power
    26

    Default

    Quote Originally Posted by BABY J View Post
    Oh - BTW - we did a break in tune, and the 404s were at 0.0 - the 404s are/were NOT weak cams in this block - but rather than tune for cam angle changes, I opted to move to the 405s's --- they were unobtainable at the time the build came together (the REAL 405s, not the new ones).



    Right - this a 0 mile rebuild performed by the dork who posted above me. He "kinda" knows what he's doing. I think he's hit mid 12's in his hatch or something. 12.5 @95mph I think. LOL
    Stover building N/A motors... haha!

  8. #8
    Twan Jdm94Coupe's Avatar
    Join Date
    Apr 2005
    Location
    Fairburn
    Posts
    4,051
    Rep Power
    20

    Default

    Why are their no prices? Or specific information on what parts are in it? Sleeved? What sleeves are they? Lightweight rods? What pistons? Etc.....

  9. #9
    www.MSSRACING.com SPOOLIN's Avatar
    Join Date
    Aug 2005
    Location
    Northwest Georgia
    Age
    35
    Posts
    5,777
    Rep Power
    21

    Default

    JG sleeve inserts, Custom Cp Pistons, Eagle Rods is all i know. I just refreshed all of the small parts.
    www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
    Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel

  10. #10
    ...makes shit happen ultm8mind's Avatar
    Join Date
    Mar 2005
    Location
    Augusta, Ga
    Posts
    2,628
    Rep Power
    19

    Default

    still got the wagon?
    According to Taketomi, true VIP style tuning is limited to only 10 Nissan and Toyota models: Nissan President, Cima, Gloria, Cedric and Fuga; Toyota Celsior, Century, Aristo, Crown and Majesta.

  11. #11
    Twan Jdm94Coupe's Avatar
    Join Date
    Apr 2005
    Location
    Fairburn
    Posts
    4,051
    Rep Power
    20

    Default

    Quote Originally Posted by SPOOLIN View Post
    JG sleeve inserts, Custom Cp Pistons, Eagle Rods is all i know. I just refreshed all of the small parts.
    ok i appreciate it homie....

  12. #12
    IA Member Si_freak's Avatar
    Join Date
    Nov 2007
    Location
    Ga
    Age
    39
    Posts
    145
    Rep Power
    13

    Default

    you gotta price range youre looking for?

  13. #13
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    Yeah I still got the wagon... sorry I missed the other posts... I don't get emails - RANDOMGUY better fix me. LOL. I've got 2k in the block - and $1700 in the head. I can show the invoices if anyone is interested. But I am also a motivated seller. Sleeved 2L that is just lower compression pistons away from being a turbo block - nothing rare there.

    The head is another story - it's gonna be hard to setup a non-v p8r head like this (rare cams) with a pro port. In short - make me an offer - you might be suprised what I will take - just open the lines of communication - I don't post much on here - but the guys that's been around know me and know I'm easy to work with. The whole lot gets a better deal than me splitting it up - but it was def built to run together.
    "I'm not a gynecologist... but I'll take a look."


  14. #14
    www.MSSRACING.com SPOOLIN's Avatar
    Join Date
    Aug 2005
    Location
    Northwest Georgia
    Age
    35
    Posts
    5,777
    Rep Power
    21

    Default

    nobody gets damn response emails on here thats Mainly why my attendance here has dropped
    www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
    Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel

  15. #15
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    BUY ME
    "I'm not a gynecologist... but I'll take a look."


  16. #16
    Certified Gearhead deondre's Avatar
    Join Date
    Jun 2010
    Posts
    389
    Rep Power
    10

    Default

    give me a price for the manifold and header??
    WTB 16x7 Polished Slips

  17. #17
    Certified Gearhead
    Join Date
    Jan 2006
    Location
    marietta
    Age
    41
    Posts
    750
    Rep Power
    15

    Default

    Let start at 1400?

  18. #18
    FullForceMotorsports LIKEG6's Avatar
    Join Date
    May 2005
    Location
    Hamilton, GA
    Age
    32
    Posts
    5,051
    Rep Power
    21

    Default

    Bump for the homie!!


  19. #19
    Afghan Goober! TheChosenOne's Avatar
    Join Date
    Sep 2006
    Location
    my momma's house
    Age
    31
    Posts
    2,206
    Rep Power
    17

    Default

    Straight nasty! Glws
    Trend settin'

  20. #20
    Certified Gearhead Manny Naber's Avatar
    Join Date
    Nov 2012
    Posts
    239
    Rep Power
    8

    Default

    Take $800 for the block? if not PM me.
    1994 Nissan Skyline BNR32- Currently being built for 1000+awhp (the works)

    2003 Subaru Wrx (jdm sti ext.conv)- 6.0 LSx , T56, Fast 92 TB,IM,MS4 cam,+++

    1995 Nissan S14.5- Sr20det, built motor, full race 3071r turbo kit, z32 tranny+++

    1997 Honda Civic Ek Hatch- In process: K24/20 BC stroker, custom turbo kit, tubbed +++

  21. #21
    Certified Gearhead Manny Naber's Avatar
    Join Date
    Nov 2012
    Posts
    239
    Rep Power
    8

    Default

    and would I need just some 84mm cp pistons for a turbo setup and drop them in and run no problem? My b16 just blew I need a drop in replacement with least hassles.
    1994 Nissan Skyline BNR32- Currently being built for 1000+awhp (the works)

    2003 Subaru Wrx (jdm sti ext.conv)- 6.0 LSx , T56, Fast 92 TB,IM,MS4 cam,+++

    1995 Nissan S14.5- Sr20det, built motor, full race 3071r turbo kit, z32 tranny+++

    1997 Honda Civic Ek Hatch- In process: K24/20 BC stroker, custom turbo kit, tubbed +++

  22. #22
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    Yup - that's all you would need. I can't even imagine what this head would do on a turbo setup --- it's be some sick power. You'd want some turbo cams - unless you're just looking for the bottom end.
    "I'm not a gynecologist... but I'll take a look."


  23. #23
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    Quote Originally Posted by civic-h22 View Post
    Let start at 1400?
    PM me what you have in mind. I know you IA guys get rich at tax time. LOL
    "I'm not a gynecologist... but I'll take a look."


  24. #24
    <SWED\ SQUAD\)~~ D3UC3S's Avatar
    Join Date
    May 2003
    Location
    somewhere, GA
    Age
    36
    Posts
    5,091
    Rep Power
    32

    Default

    Bump for a nasty setup and super cool dude. I think i was getting tuned when Charles cranked up the first setup in the wagovan. Yea, i drove you to the gas station in my h23vtec hatch.

    Buy with confidence IA.
    '82 TE72 SR5 Sport Coupe
    3tc



  25. #25
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    ^^ I remem you - of course! What's new? Still in the game or taking a breather?
    "I'm not a gynecologist... but I'll take a look."


  26. #26
    Certified Gearhead Manny Naber's Avatar
    Join Date
    Nov 2012
    Posts
    239
    Rep Power
    8

    Default

    Quote Originally Posted by BABY J View Post
    Yup - that's all you would need. I can't even imagine what this head would do on a turbo setup --- it's be some sick power. You'd want some turbo cams - unless you're just looking for the bottom end.
    I just need the bottem end right now to get my car back on the road and then I would go from there. I really need this block though to save me some time. Txt me at 762-218-0270 or call but I def. am ready to make the drive from Augusta to pick it up. Let me kno asap plz!
    1994 Nissan Skyline BNR32- Currently being built for 1000+awhp (the works)

    2003 Subaru Wrx (jdm sti ext.conv)- 6.0 LSx , T56, Fast 92 TB,IM,MS4 cam,+++

    1995 Nissan S14.5- Sr20det, built motor, full race 3071r turbo kit, z32 tranny+++

    1997 Honda Civic Ek Hatch- In process: K24/20 BC stroker, custom turbo kit, tubbed +++

  27. #27
    <SWED\ SQUAD\)~~ D3UC3S's Avatar
    Join Date
    May 2003
    Location
    somewhere, GA
    Age
    36
    Posts
    5,091
    Rep Power
    32

    Default

    Quote Originally Posted by BABY J View Post
    ^^ I remem you - of course! What's new? Still in the game or taking a breather?

    Always in the game. Just having a family and buying guns kills all my play money. Been doing the 4x4 thing for a minute. Had about 7 jeeps since i last spoke with ya.

    Good to see you still hanging out. I have been keeping up with all of your RC plane stuff. Blows my damn mind!
    '82 TE72 SR5 Sport Coupe
    3tc



  28. #28
    Certified Gearhead Manny Naber's Avatar
    Join Date
    Nov 2012
    Posts
    239
    Rep Power
    8

    Default

    Does someone have a # for the OP? I really neeed to get in touch
    1994 Nissan Skyline BNR32- Currently being built for 1000+awhp (the works)

    2003 Subaru Wrx (jdm sti ext.conv)- 6.0 LSx , T56, Fast 92 TB,IM,MS4 cam,+++

    1995 Nissan S14.5- Sr20det, built motor, full race 3071r turbo kit, z32 tranny+++

    1997 Honda Civic Ek Hatch- In process: K24/20 BC stroker, custom turbo kit, tubbed +++

  29. #29
    Certified Gearhead Manny Naber's Avatar
    Join Date
    Nov 2012
    Posts
    239
    Rep Power
    8

    Default

    Bump I need these parts lol
    1994 Nissan Skyline BNR32- Currently being built for 1000+awhp (the works)

    2003 Subaru Wrx (jdm sti ext.conv)- 6.0 LSx , T56, Fast 92 TB,IM,MS4 cam,+++

    1995 Nissan S14.5- Sr20det, built motor, full race 3071r turbo kit, z32 tranny+++

    1997 Honda Civic Ek Hatch- In process: K24/20 BC stroker, custom turbo kit, tubbed +++

  30. #30
    Certified Gearhead Manny Naber's Avatar
    Join Date
    Nov 2012
    Posts
    239
    Rep Power
    8

    Default

    How is hard to BUY a part?
    1994 Nissan Skyline BNR32- Currently being built for 1000+awhp (the works)

    2003 Subaru Wrx (jdm sti ext.conv)- 6.0 LSx , T56, Fast 92 TB,IM,MS4 cam,+++

    1995 Nissan S14.5- Sr20det, built motor, full race 3071r turbo kit, z32 tranny+++

    1997 Honda Civic Ek Hatch- In process: K24/20 BC stroker, custom turbo kit, tubbed +++

  31. #31
    Twan Jdm94Coupe's Avatar
    Join Date
    Apr 2005
    Location
    Fairburn
    Posts
    4,051
    Rep Power
    20

    Default

    Quote Originally Posted by Manny Naber View Post
    How is hard to BUY a part?
    When you've been on IA for a while like I have, you notice what threads to stay away from. Some people think because of a certain "status" on here that the basic rules don't apply to them. I was seriously considering buying this head for a turbo setup in my DD civic sedan. Once I saw that the thread wasn't specific about what was in the motor and had ZERO prices I just went and bought a stock head and gonna do one myself.

    But I'm sure he will respond to you soon...... just be patient.

  32. #32
    www.MSSRACING.com SPOOLIN's Avatar
    Join Date
    Aug 2005
    Location
    Northwest Georgia
    Age
    35
    Posts
    5,777
    Rep Power
    21

    Default

    you should have tried to buy the head. I just want it out of my garage LOL
    www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
    Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel

  33. #33
    Twan Jdm94Coupe's Avatar
    Join Date
    Apr 2005
    Location
    Fairburn
    Posts
    4,051
    Rep Power
    20

    Default

    Quote Originally Posted by SPOOLIN View Post
    you should have tried to buy the head. I just want it out of my garage LOL
    damn i didnt know you had it, lol.... damn i would've just hit you up on facebook..... oh well i guess

    glws

  34. #34
    www.MSSRACING.com SPOOLIN's Avatar
    Join Date
    Aug 2005
    Location
    Northwest Georgia
    Age
    35
    Posts
    5,777
    Rep Power
    21

    Default

    Block is sold, head and cams chillin.
    www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
    Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel

  35. #35
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    I don't think I have a specific status anywhere. But I will say that anyone who knows me knows that I don't sell junk. I've been doing this for 19 years... and if it's one thing I've learned to do is not to spoil it for the next guy - I RARELY sell anything locally bc I don't want to see it again when it's gone - personal preference.

    I've also learned that IA is full of tire-kickers anyway. The serious guys on here sent me PMs - deals were worked out and the block is gone, and the buyer got the deal of the century - he wouldn't be able to put that setup together for the price anywhere on the planet. Contacting Matt will not get you anything but instructions to contact me. If posting that I'm a motivated seller doesn't get my inbox busy then neither will posting a price.

    As stated - the head is still available - it is NOT some half-ass put together shit. In fact, it's prob the last head any B series guy would ever need to buy - no matter if he's turbo or NA. I didn't make the most power out there w/ this one - but I definitely made my power quick and made some VTEC cars look silly on motor - and made some turbo cars look silly on the spray.

    Am I done with Hondas? I can't say that truthfully since I still own a few - LOL. But I am focusing on the Datto, MINI, B13 and my aerial video business for now.

    BUMP for the goods.
    "I'm not a gynecologist... but I'll take a look."


  36. #36
    Certified Gearhead
    Join Date
    Jun 2008
    Location
    center field
    Age
    38
    Posts
    708
    Rep Power
    12

    Default

    Bump for bj

  37. #37
    <SWED\ SQUAD\)~~ D3UC3S's Avatar
    Join Date
    May 2003
    Location
    somewhere, GA
    Age
    36
    Posts
    5,091
    Rep Power
    32

    Default

    ^^ I don't think he's gonna do that
    '82 TE72 SR5 Sport Coupe
    3tc



  38. #38
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    41
    Posts
    16,170
    Rep Power
    41

    Default

    Quote Originally Posted by D3UC3S View Post
    ^^ I don't think he's gonna do that
    I see what you did there. LOL
    "I'm not a gynecologist... but I'll take a look."


  39. #39
    www.MSSRACING.com SPOOLIN's Avatar
    Join Date
    Aug 2005
    Location
    Northwest Georgia
    Age
    35
    Posts
    5,777
    Rep Power
    21

    Default

    LOL
    www.MSSRACING.com - 99 Civic CX - Best ET: 9.53 / Best MPH: 160 - Competition Clutch - Arias Pistons - Coatings M.D. - Mahle-Clevite - ebtec - AHobbs Racing - JKOBD - TDC Performance
    Daily D: 2007 Dodge 2500 MEGA CAB, Cummins Turbo Diesel

  40. #40
    IA Member SRK420a's Avatar
    Join Date
    Apr 2008
    Location
    Lithonia,Ga
    Age
    28
    Posts
    799
    Rep Power
    12

    Default

    I really want that head bro contact me at 7708855218

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!