Part out!! B16A JDM parts, brand new aftermarket parts, B16A3 bottom end, tons!!!!!!!

[r.etheridge]

I am parting out a B16A JDM motor build I started a long time ago but never finished.
aftermarket parts are brand new, most I still have the boxes for and the JDM parts have under 20k on them. I also have a complete bottom end B16A3 out of a 1995 del sol v-tec. All prices are neg. but make sure your offer is reasonable please. I can and will sell a complete block and a complete head. Just lmk what you want on it so that we can negotiate a price. The best way to contact me is text 478-952-4027. I do accept paypal and can ship at your expense. I am willing to meet halfway to atlanta if your buying a good amount of items, in other words, Im not going halfway to atlanta to make $100 sale. Thanks for looking.

Darton solid deck sleeves installed in block and block has been decked part# DS-B1681 $500 (with oil pump, oil pan, pick up tube, cap, girdle $550)
Cometic head gasket part# CM-C4168HP (B16A or B18C) $50
Venom adjustable cam gears part#VENC10-125B(90-99 TEG/99-00 CIV SI) $150 both
B&M commando fuel pressure regulator $25
Fuel pressure gauge $20
Energy suspension motor mount inserts p# 16.1106R $25
Holly 68mm throttle body 112-540 $180
Unorthodox under drive pulley set UNR-040600902 $150
Venom fuel injectors HP621-262 $150
Air mass comp blue header $160
Moroso oil pan 20901 w/ pick up tube 24011 $220
Crower connecting rods (already attached to pistons) B93744B …………………………………… $500 (price is with pistons)
Arias pistons w/ rings dome shape (were custom made bored .030 over from stock) part# 311855………….
Venom intake manifold M21-333B $250
Fuel cooler (6AN fitting) $20
Installed inside the head and will be sold with head:
Crower valve springs 68185
Crower Titanium retainers 87093
Manley valves custom made (11203-8 PC) valve head DIA: length 4.670 Tip .260, 5 angle valve job, port and polish, flow test, and assy…………………………….$700.
-Stock parts: all have less than 20K on them and are JDM parts unless specified otherwise:
Ecu with jet chip OBD2 $200
Wiring harness OBD1 (off of 95 Del sol B16A3) $125
Wiring harness OBD2 (lots of cut wires, could splice back and be used) $40
Crank $75
Cams and gears $75
Valve cover $100 (can powder coat any color you want)
Intake manifold $125
Throttle body $25
Fuel rail $20
*IM, TB, and FR for $150
Power steering pump $30
(2)Flywheel $50
Clutch (with good meat left, probably 75%) $40
Honda OEM upper and lower engine gasket sets complete $make an offer$
B16A3 complete bottom end minus oil pan (out of a 95 Del sol with 80k on it, not assembled) $make an offer$
Stock clutch kit brand new in box (scahs) $130