I have a few del sol interior I would like to get rid of. I can ship at your expense.
part around shifter $25
speaker covers rear $15
grey part between two speaker covers $10
back storage compartments $50
or $60 for all
* B16A parts are below*
I have a few del sol interior I would like to get rid of. I can ship at your expense.
part around shifter $25
speaker covers rear $15
grey part between two speaker covers $10
back storage compartments $50
or $60 for all
* B16A parts are below*
Last edited by r.etheridge; 05-15-2010 at 08:16 AM. Reason: title change and price change
bump
$70 for everything
Last edited by r.etheridge; 04-07-2010 at 07:36 AM.
pics
Last edited by r.etheridge; 05-15-2010 at 08:14 AM. Reason: prices
more pics
Last edited by r.etheridge; 05-15-2010 at 08:15 AM.
alt. is OBD1($40) and pulley set does not come with it
All parts are for a 99-00 civic Si B16A and are brand new. I do have paypal and can ship. I live in Middle GA
Holley 68mm throttle body part# 112-540 $175
Venom intake manifold M21-333B $225
Arias pistons 82mm dome shaped 311855 on crower rods B93744B $400
Last edited by r.etheridge; 05-15-2010 at 08:17 AM.
what else you wanna know? they are 82mm dome shaped, they were custom made for myself because when I bought them, they didnt shelf stock 82mm for B16's. They are brand new along with the rings. Built for compression between 11.5 to 1 and 12.5 to 1. made by arias. pm me if you wanna know anything else
intakemanifold, fuel rail, TB, and injectors $125
used clutch $30
obd 1 alt. in picture above $40
Last edited by r.etheridge; 05-15-2010 at 08:17 AM.
I have a B16A3 bottom end with jdm pistons, rods, and crank. comes will all of that plus oil pump, girdle, oil pan, and picke up, main caps and bolts and whatever else I have layin around that goes to it. The crank may need to be ground( see pics) $160. Will sell with a crank in perfect shape for $240
Last edited by r.etheridge; 05-15-2010 at 08:18 AM.
ttt
Last edited by r.etheridge; 05-15-2010 at 08:19 AM.
I have a B16A head with less than 20k that came off of a 99 civic si j-spec. It has been broke down fully and built back up by fox lake out of ohio. Has manley custom valves DIA; length 4.670, tip;.260 crower titanium springs and retainers part# 68185 for the springs and 87093 for the retainers. Built to take stage 3 cams. It also has a port and polish(the entire head) and a 5 angle valve job and the head has been flow checked and it checked out good. Since the head was rebuilt, it has not been used so everything is brand new. I will throw in a complete upper oem honda gasket and seal set brand new as well. Have over $1100 invested on a brand new head. asking $600
Last edited by r.etheridge; 05-15-2010 at 08:20 AM.
bump
bump
you would happen to have the trunk / cargo stuff that go in the trunk would you, like the cardboard that goes over the steelies and the carpet on top of that for a del sol
are those piston from a ctr ????
(((((No more 4 door))))))
bump!!!!
bump
made some changes on prices and added a few things
ttt
weekend bump
bump for looking.. Wish I had the money for that head lol.. GLWS.
interested in the cams and ecu if still available lmk asap!!!!!
[IMG]hondaaccord4.jpg[/IMG] T.E.T.E.T.E.
trade ya an ls long block for the piston/ rod combo
d15b7 fs 300obo has to go soon
sorry man no trades
do 100 for the good crankshaft?
yeah I can do that. PM me
PM replied
This is what I have left and with new prices
cometic head gasket(new) $50
holley 68mm TB (new) $150
Unorthadox pulley set (new) $120
airmass headers comp blu (new) $100
moroso oil pan w/pick up tube B-series (new) $200
crower connectiong rods on arias pistons 82mm dome shaped w/ rings (new) $400
venom intake manifold b-series (new) $200
head w/ all performance parts installed (new)(read first post in this thread for details) $550
stock crank $75
jdm cams and gears $75
energy suspension motor mount inserts (new) $25
OBD1 alternator $30
JDM valve cover (blue and white powder coated) $150
power steering pump off of civic si 99 $30
complete jdm IM,TB,fuel rail and injectors $100
used clutch and pressure plate stock( 75% left on it) $20
B16A3 block $100
B16A3 piston and rods $50
Last edited by r.etheridge; 05-09-2010 at 06:28 PM.
bump
ups for you bro. got n intake yet 4 your d yet?
ttt
somebody get this head!!!!