Email for special IA pricing. [email protected]

FITS THE FOLLOWING:

ALL B SERIES ENGINES! WILL FIT CRX AND DA WITH AFTERMARKET TRACTION BARS. ITR MUST REMOVE TRANS BRACE FOR PROPER FITMENT.

BASIC INFORMATION ON THIS HEADER

15whp+ OVER A STOCK B18 HEADER ON A 2.0 LITER
10whp+ OVER DC JDM HEADER

Piping size on this header is as follows; Primary tube off the flange out of the head is 44.5 mm. The piping then steps up to 48 mm. The 4-2 Tri-Y is 50.8 mm and then the 2-1 Tri-Y is 54 mm. Then the collector is 65mm (which is 2.5") The piping at the flange is welded on the inside and the outside.

---Will fit with AC and PS

---these are brand new in the box

---Made of 304 Stainless steel

---1 year limited warranty

---Long tube tri-y header

---2.5 collector

---Machined CNC manifold flange

---18G on the 304 S/S. Measured at .049" to .050"=

---Flange is .38" which is just about 3/8" thick ---18G on the 304 S/S. Measured at .049" to .050"

ALL HEADERS COME WITH EXHAUST MANIFOLD GASKET, HARDWARE, AND DONUT GASKET!

DYNO PROVEN, 15+ WHP GAIN BY BOLTING IT ON, 20+ WHP WITH TUNING



we also sell this extension for easy installation of the header