Results 41 to 80 of 118

Thread: Btec Blowout Cell!! OBD0,1, and2 b16 parts, 92-95 civic and 94+ Integra Parts

Threaded View

  1. #1
    THERE CAN B ONLY ONE BTEC's Avatar
    Join Date
    Mar 2005
    Location
    A WORLD OF ANGER AND CONFUSION.
    Age
    45
    Posts
    17,271
    Rep Power
    40

    Default Btec Blowout Cell!! OBD0,1,&2 b16 parts, 92-95 civic and 94+teg Parts *STUFF ADDED*

    b16a2 Shortblock. Does not smoke or knock. Rings have maybe 2k on them. Bearings looking fine when i put knew rings in. Been sitting for about 6 months. (no knock sensor, pcv valve, or timing belt tensioner) sold

    B18 automatic tranny unknown milage but worked before i did 5 spd conversion on friends car. (torque converter and flex plate included) sold

    EG A/C setup (condenser, fans, relay harness, dryer, lines from firewall) everything except 2 lines that go to compressor. sold

    Extra A/C Relay harness $5

    2 cooloing fans for 4 civic. Might fit dc integra too. $10 each


    EXtra harnesses. 2 obd1, 1 obd0, 1 OBD0 engine and dash harness with fuse boxes and relays (some connectors missing but most of the prolly stil there. Neither are vtec i dnt think.
    $10 each

    Automatic Padals and shifter assembly (cotter pins and washers may be missing but the main parts and there. $20

    DC Integra Airbox (hose from t-body to filter MIA) $10

    1 OBD1 B-series A/C compressor bracket, 1OBD0 compressor bracket (1 of the obd1 brackets has broken bolt that can be drilled out but i didnt feel like it) $20 each 1 sold

    1 obd1 b16 exhaust manifolds, 1 obd0 b16 manifold (with 2 o2 sensors), 1 obd1 gsr exhaust maniold $20 each b18b sold
    1 DA dwn pipe (piece that bolts to bottom of manifold) $5

    4 b-series heat shileds, 1 91 accord f22 heat shield $5 each

    2 d-series intake manilfolds, 1 obd0 b16 intake mani, 1 obd1 b16 mani (not sure what sensors or left, and i think they all have t-body's) $20 each

    92-95 civic front control arms not for factory sway bar (upper and lower) $20

    92-95 civic rear control arms not for factory sway bar (upper and lower) $20

    92-95 rear DRUM Brake setup including parking brake cables (ford blud drums) $30 Pic on page 2
    92-95 civic hatch bumper supports with foam (front and rear) $10 each

    2 b16 cranks, 1 b18b crank (1 of the b16 cranks will need to be machined for oversized bearing) others should be fine just getting polished $10 for bad crank $30 for good ones. b18 crank sold

    2 obd0 b16 p/s pumps (big pulleys), 1 obd1 b16 p/s pump $20 each

    1 dc integra automatic rear l-bracketsold

    1 96 teg axle back muffler STOCK $20

    1 b16 p/s braket (upper and lower) sold

    1 Set of tinted dc taillights $15

    1 94 civic hatch washer fluid bottle with pump $10

    1 civic/teg rear mount with urethane insertssold

    1 integra drivers mount sold

    1 B16 drivers mount and post mount with nuts sold

    1 b-series top tranny bracket sold

    1 passenger side aftermarket projector headlight $5

    6 b-series intake manifold braces $5 each

    Misc timing belt covers $2 per piece

    3 header braces $2 each

    1 automatic dc integra intermediate shaft sold

    b18b head and intake manifold (caps, cams, and valve cover will be included but not pictured) sold
    94 civic hatch tail lights (i have the covers that make them all CF or all black so you can paint them) $10

    1 b-series a/c compressor sold

    1 dc integra automatic cluster $15

    1 94 civic cx cluster $15

    1 main relay $10

    1 OBD1 P75 manual ecu sold

    1 OBDO PR3 ecu sold

    1 Skunk 2 obd2a to obd1 conversion harness sold

    1 obd0 pm9 ecu $20

    1 225/35/20 kumho Brand New!! $75
    EXTRA STUFF!! Pics on page 2
    1 Nitrous Kit. Chrome bottle, 175 hp nos solenoid, 200 hp fuel solenoid, all lines, switches, and button. Bottle heater. Purge solenoid. All u need is to tap into your fuel supply. I got 10 extra jets im throwing in. sold

    APC Coilovers. One sleeve is missing lock spring. 2nd one from the left. I got 2 more coils to throw in bc i dnt need em. $20

    ***Some prices are negotiable. All parts are in Riverdales but i live in Sandy Spring. Some parts are dirty as fook (see pics for details). engine and tranny will have to be picked up in or close to riverdale unless you pay extra.
    Last edited by BTEC; 07-26-2009 at 08:50 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!