Results 1 to 14 of 14

Thread: B16 Shortblock

  1. #1
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default B16 Shortblock

    Un-assembled. Out of a 99 civic SI. Was rebuilt .020 over. Was taken apart because it was thought the block had a problem but it ended up being the head. Motor only had about 2000 miles on it when It was disassembled. It is very clean. You only need new rings and bearings to put it back together. I guess a quick cylinder hone wouldn't hurt though.

    The crank, rod ends, mains and cylinders are covered in moly lube to prevent rust from forming while is was sitting. Rods and pistons are assembled.
    Includes Block, Crank, Rods, PR3 Pistons (.020 over), oil squirters, oil pump, rear seal housing, oil pan, oil pickup, windage tray and all the bolts for it.

    Price $150 obo






    Also have a set of B16 camshafts-$20

    And a set of 96 Civic coupe tail lights- $25
    Last edited by RedEj8; 01-26-2009 at 12:01 PM.

  2. #2
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default

    Bump..Make an offer I can't refuse..

  3. #3
    Special Rusbuilt's Avatar
    Join Date
    Nov 2006
    Location
    Knoxville, TN
    Age
    40
    Posts
    79
    Rep Power
    19

    Default

    sent u a pm

  4. #4
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default

    Replied. Also cams and tail lights added.

  5. #5
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default

    B16 pending...

  6. #6
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default

    Bump!

  7. #7
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default

    Flaked.. Price drop to $150.. Add $10 and i'll meet you at Summit with it!

  8. #8
    sleeve me please?
    Join Date
    Apr 2007
    Location
    monroe
    Age
    36
    Posts
    664
    Rep Power
    19

    Default

    is the block still for sale if so pm me!

  9. #9
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default

    bump

  10. #10
    turbos
    Join Date
    Aug 2007
    Age
    40
    Posts
    1,296
    Rep Power
    20

    Default

    what bore are the pistons. and would you part them and ship them?

    pm me with details
    TOO BIG

  11. #11
    rolla rollin
    Join Date
    Aug 2007
    Location
    middle GA
    Age
    34
    Posts
    4,818
    Rep Power
    25

    Default

    if i sell my ls block and head soon ill pick this up from you!!!!

  12. #12
    The JDM SnoW PloW 99jdmLs's Avatar
    Join Date
    Feb 2008
    Location
    Columbus
    Age
    37
    Posts
    2,259
    Rep Power
    21

    Default

    Good deal man. Bump

  13. #13
    D0 W3RK RedEj8's Avatar
    Join Date
    Jun 2007
    Location
    Macon
    Age
    39
    Posts
    1,566
    Rep Power
    20

    Default

    Pistons are .020 over. I'd rather not just part the pistons because I'd have to go get the pins pressed out of the rods.

    The pistons you see in the box are the stock bore pistons.

  14. #14
    + MAKE EM SAY UHH + Black4DrEK's Avatar
    Join Date
    Jun 2007
    Location
    Southside Ridin HATCH
    Age
    36
    Posts
    9,812
    Rep Power
    33

    Default

    b16 oil pan?? for sale?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!